Filter
Top Products
15
If you then want to set the alarm again,
press
STANDBY
. While
STANDBY
flashes, press
ENTER
.
USING THE SLEEP
TIMER
The sleep timer sets the receiver to
turn off after a length of time you set,
so you can fall asleep as you listen to
the receiver.
1. When the receiver is off, press
SLEEP
. The receiver turns on, and
appears on the display.
2. Repeatedly press
SLEEP
until the
desired amount of sleep time (15,
30, 60, or 90 minutes) appears on
the display.
3. Tune to the desired station.
After the amount of time you set in
Step 2, the receiver turns itself off. To
turn off the receiver sooner, press
RA-
DIO POWER
.
MAKING A RECORDING
LOADING A CASSETTE
TAPE
1. Press
STOP/EJECT
to open the
cassette compartment’s door.
2. Use your finger or a pencil to turn
the cassette’s hub and take up
any slack.
Note:
Avoid touching the tape. Finger-
prints attract dust and dirt that can af-
fect sound quality.
3. Insert the cassette into the com-
partment with the open side up,
full reel to the right, and the
desired tape side facing you.
4. Close the compartment’s door.
20-219.fm Page 15 Wednesday, August 4, 1999 9:23 AM