Filter
Top Products
8
Basic Operation
3. Hold the CD vertically and insert it into the CD slot, label side to the left.
4. To load more CDs, repeatedly press
DISC NUMBER
(or
DISC
on
the remote) so the desired rack number appears on the display. Then
repeat Step 3.
5. When you finish loading the desired CDs, press
OPEN/CLOSE
to close the
rack cover.
To remove a CD, select the slot number of the disc you want to remove, then
press
UNLOAD
. The rack rotates the selected disc slot to the front. When the
rack cover opens, remove the selected CD. Press
OPEN/CLOSE
to close the
rack cover.
Cautions:
• Do not try to manually open the rack cover; only use
OPEN/CLOSE
.
• Do not load anything other than 5-inch or 3-inch CDs into the slots. This
could damage the CD changer.
• Do not use an adapter for 3-inch CDs. Also, avoid placing 3-inch CDs
between 5-inch CDs as this makes it hard to remove the 3-inch CDs.
• The CD changer does not play with the rack cover open.
Loadin
g
a CD in the
S
in
g
le Pla
y
Slot
The single play slot lets you easily load a single CD. To load a CD in the single
play slot, press
SINGLE PLAY/ACCESS
. The CD changer turns on if it was turned
off, and rotates the rack so the single play slot comes to the loading position.
Insert the CD with its label to the left. Then press
SINGLE PLAY/PLAY
to start
playing.
To remove a CD from the single play slot, press
SINGLE PLAY/ACCESS
. The
rack rotates the single play slot to the front. When the rack cover opens, remove
the CD.
The single play slot is numbered as “0” and is located between discs 100 and 1.
You can access this slot by pressing
DISC NUMBER
when the display shows
100
, or
DISC NUMBER
when the display shows
1
. You can also reach to the
single play slot by pressing
0
on the remote control. The display shows the disc
number as
P0
.
Usin
g
the Demo
The demo showcases the features of your CD-8400 and its display. To turn on
the demo, press within 1 second of turning on the CD changer. To turn
off the demo, press any button.
Notes:
• You can use
OPEN/CLOSE
to open
the rack cover and remove the disc if
the disc to remove is already at the
front of the rack. The display shows
HOLD
while the rack cover is open.
• You can open the rack cover even
while a disc is playing. Hold down
OPEN/CLOSE
until the display shows
OPEN
. The rack cover opens and the
display shows
HOLD
. In this case,
the rack does not rotate and you can-
not use
UNLOAD
,
SINGLE
PLAY/
ACCESS
, or
DISC NUMBER
.