Filter
Top Products
8
CD PLAYER OPERATION
LOADING A CD
1. Set
FUNCTION
to
CD
. The
POWER
indicator lights and
Cd
appears in
the display.
2. Press
PUSH/OPEN
on the CD
compartment cover. The CD com-
partment cover lifts.
3. Place a CD in the compartment
with the label facing up.
4. Close the compartment cover.
Within a few seconds the display
shows the CD’s total number of
tracks.
PLAYING A CD
1. After loading a CD, press
PLAY/
PAUSE
. The CD player plays the
CD starting with the first track.
The display shows the play indica-
tor and the current track number.
Notes
:
• To search for sections of tracks,
see “Audible Search.”
• A sudden shock or jolt while a CD
is playing might suddenly change
the speed of the CD’s rotation or
cause the CD player to skip the
track it is playing and, as a result,
momentarily mute or distort the
sound. This is not a malfunction.
2. Adjust
VOLUME
and
TONE
to the
desired levels.
Warnin
g
: Your CD-3316 CD
player has a wide dynamic range.
If you turn the volume too high
during the low volume sections of
a program, you might damage
your hearing during sudden loud
sections.
3. Press
SBS
to turn on the SBS sys-
tem. Press the button again to
turn it off.
4. To temporarily stop play, press
PLAY/PAUSE
. The pause indicator
appears on the display. Press
PLAY/PAUSE
again to resume
play.
5. To completely stop play, press
STOP/CLEAR
.
Note
: If you do not stop the CD player,
it plays to the end of the last track and
automatically stops. When the CD
player is stopped, the play indicator
14-540.fm Page 8 Wednesday, June 30, 1999 2:27 PM