Filter
Top Products
14
• Remove all input sources so you can record silence over all or part of the tape.
• Use a bulk tape eraser (such as
Cat. No. 44-232, not supplied),
available at your local Radio
Shack store.
Restoring Tape Tension and
Sound Quality
After you play a cassette tape several
times, the tape might become tightly
wound on the reels. This can cause
playback sound quality to deteriorate.
To restore the sound quality, fast-for-
ward the tape from the beginning to the
end of one side, then completely re-
wind it. Then loosen the tape reels by
gently tapping each side of the cas-
sette’s outer shell on a flat surface.
Caution
: Be careful not to damage the
cassette when tapping it. Do not touch
the exposed tape or allow any sharp
objects near the cassette.
14-540.fm Page 14 Wednesday, June 30, 1999 2:27 PM