Filter
Top Products
13
5. Press
RECORD
to begin record-
ing.
Note
: You might hear a low-vol-
ume tone from the CD-3316’s
speakers during playback after
you record an AM radio program.
To insure a tone-free recording,
make a test recording before you
record the desired program. If you
hear the tone in the test recording,
set
BEAT-CUT
on the back of the
CD player to either of the other
positions.
6. To stop recording, press
STOP/
EJECT
.
TAPE CARE TIPS
Preventing Accidental
Erasure
Cassette tapes have two erase-protec-
tion tabs - one for each side. To protect
a recording from being accidentally re-
corded over or erased, use a screw-
driver to remove one or both of the
cassette tape’s erase-protection tabs.
Notes
:
• If you want to record over a tape
side after you have removed the
erase-protection tab, place a
piece of strong plastic tape over
that side’s erase-protection hole.
Be sure you cover only the hole
originally covered by the erase-
protection tab.
• Removing the erase-protection
tabs does not prevent a bulk
eraser from erasing a cassette
tape.
Erasing a Cassette Tape
If you no longer want a recording, you
can record over it or erase it.
To erase a previously recorded tape,
you can either:
14-540.fm Page 13 Wednesday, June 30, 1999 2:27 PM