Filter
Top Products
7
8
AF2102-LA
The link arm is located on the bottom side of the frame assembly. Use this link for attaching the rear of the first enclosure. The frame allows for up or
down angle options for use with either stacking or suspending. The 4° “normal” locations on the link system will yield a net 0° vertical inclination.
Use 4° link location for 0°
vertical inclination.
25.7"
(653 mm)
19.5"
(696 mm)
5/16" diameter, 1.25" long
ball-lock pins.
Bumpers
Stacking bumpers align
with stand sockets of QSC
215PCM subwoofer window.
Standard L-track
WL SMALL GRID
Do not stack more than four (4) enclosures on a WL SMALL GRID.
Use only the QSC supplied 5/16" diameter x 1.25" long ball-lock pins or equivalents from a reputable source on front receiver tubes.
The WL SMALL GRID interfaces with QSC’s 215PCM or 215SB subwoofer in either a stacked or flown configuration. The stacking bumpers on the
frame may need to be moved to the opposite side of the frame member for use. The small frame is constructed using standard “L” track for rigging.