Filter
Top Products
7
Rack Mounting
1- A #2 size cross point (Phillips) screwdriver.
2- The rack mount ears included with you SRA amplifier.
To attach the rack mounting ears, you will need:
Dimensions shown are
useful for non-rack
mount installations.
SETUP- Stand-alone mounting (cont’d.)
Continued, top of next page.....
Rack mounting the amplifier
Rack mounting is optional. The amplifier fits a 483 mm (19”) width equipment rack.
To rack mount the amplifier:
1- Install the rack mount ears (see below and the following page for details).
2- Position the amplifier in the equipment rack and secure all four corners of the front panel using
machine screws and washers. The size and thread type of the screws is determined by the equip-
ment rack. Washers should be large enough to prevent the screw head from slipping into the rack
ear mounting hole. Plastic washers will help prevent the screws from scratching the front panel.