QSC Audio RAVE 520uz Stereo System User Manual


 
24
Preliminary Specification
Dynamic Range (AES-17, -60dB Method, all sensitivities)
unweighted >110dB
A weighted >113dB
Distortion (20Hz-20 KHz, all sensitivities)
Gain= 0 - 30dB <0.008% THD+N
Gain >30dB <0.05% THD+N
Crosstalk (20Hz - 20KHz)
inter-channel (max) >75dB
inter-channel (typ) >90dB
intra-channel (max) >85dB
intra-channel (typ) >100dB
Frequency Response
20Hz - 20KHz (max) ± 0.5dB
20Hz - 20KHz (typ) ± 0.2dB
Program Inputs 8
Connector Type 3-pin "Phoenix Style" (a.k.a. "Euro Style") detachable terminal blocks
Type Electrically balanced
Grounding All shield terminals connected to chassis
Pinout 1:+ 2:- 3:CHASSIS GND
Input Impedance (nom.) Balanced: 6.81k ohms Unbalanced: 13.6k ohms
Common-Mode Rejection 20Hz - 20KHz (min.): >54dB,20Hz - 20KHz (typ.): >60dB
E.I.N.(max.) 150 ohm, 30dB: -124.5dBu150 ohm, 60dB: -125.0 dBu
Input Sensitivities (variable)
Vrms: 0.9 mV to 15.46 V dBu: -62.2 to +26dBu dBV: -64.4 to +23.7 dBV
Phantom Power (per IEC1938 (1996)) +48V (software-selectable)
Audio Converters 24 bit, 48KHz
Mute infinite attenuation
Delay Standard CobraNet Latency Low Latency
RAVE to Network
Analog input through full DSP chain to CobraNet output 7.104 milliseconds 4.438 milliseconds
Specifications are subject to change without notice.