Filter
Top Products
iPod 2
Ph 2
Ln 2
iPod 1 iPod 2
iPod 1
Ph 1
Ln 1
-dB +dB
-dB +dB
-dB +dB
-dB +dB
-dB +dB
-dB +dB
MIC On
MIC Volume High Low
Cue Volume
Phones
0 10Cue 2
Mix
0 10 -dB +dB -dB +dB
Fader Reverse
On
Off
MIC
Cue 1
Your PYLE PRO STEREO MIXER COMPATIBLE WITH iPod
is a sophisticated control center, perfect for mixing sound from multiple playback sources such as
microphone, tuners, CD players, turntables or the audio outputs from a VCR. This mixer is ruggedly
constructed for home or professional use. Wide range volume controls permit you to adjust sound levels
accurately to achieve just the right mix for playing through your speaker system or for recording.
Please read this manual thoroughly before you attempt to set up and use the mixer. It contains a
range of suggestions and instructions to insure safe usage. Set up and used properly, you can expect
years of trouble-free service from this product.
Input/Output Features
Features and Controls
Pyle Pro Mixer Owner’s Manual – 1i – Pyle Pro Mixer Owner’s Manual
Owner’s Manual Table of Contents
Input/Output Features
Features and Controls
Presetting Controls Before Use
Connecting the Outputs
Playing the Mixer’s Output Signal
Recording the Mixer’s Output Signal
Connecting the Mixer Inputs
Using Headphones
Using the Mixer Controls
Using the Microphone
Using the Fader Reverse
Using the USB 1 and 2
Using the Crossfader
Using the Tone Controls
Using the Master Level Control
Troubleshooting
Care and Maintenance
Specifications
Warranty
i
1
2
3
4
6
7
7
8
8
9
MIC Volume Control
adjust of the input
volume for the
microphone
MIC Tone Controls
permit adjustment of
the high and low of
a selected input
Fader Reverse
on/off Switch
Channel Cue selectors
let you “preview” an input source,
using the headphones, so you
can adjust the volume prior to
mixing it in.
Cue Volume Control
adjust the headphone
volume
Headphone Jack
accepts 1/4" plug
15V AC
Power
USB 2
Video Out 2
Master
Output
Record
Output
L
R
L
R
GND
PH LN
Input 2 Input 1
GND
PH LN
Video Out 1
USB 1
L
R
L
R
Input/Output Features
Power on/off Switch
USB 1 and 2
Video Output
for iPod1
Video Signal
Video Output
for iPod2
Video Signal
Master Output Jacks
to connect the mixer to a
receiver or amplifier- to use
cables with RCA-type plugs.
Record Output Jacks
to connect the mixer to a
tape deck for record the
mixed program
Ground Screw for
turntables
Input select Switches
set these switches based on what in
plugged into PHONO / Line input jacks
Purpose stereo Inputs
for using a turntable with a
magnetic cartridge OR a high
level input source
iPod Dock
Input source Selectors
let you easily selector your
choice of audio inputs for
mixing
Channel Gain Control
lets you adjust the gain of
the input source
VU Display with Bright LED
Channel 1, 2 Tone Controls (EQ)
permit adjustment of the high, mid
and low of the mixer output signal
Channel Level Controls
allow fingertip control of all sound
mixing and fading
Master Level Control
adjusts the mixer’s overall
output volume level
Crossfader control
let you smoothly and quickly
switches between two
playing input sources
MIC Input Jack
accepts balanced or
unbalanced inputs
with 1/4" plug