Filter
Top Products
for several seconds will exit PGM
mode.
- When the disc is playing in
programmed order, pressing MEM
button (20) for several seconds will
cancel the all programmed content
and “CLR” appears on the display.
- If you don’t press MEM button (20)
to carry out program setting, then
press PGM button (21) for several
seconds, “NO-P” will appear.
• TRACK/TIME DISPLAY
Press AS/PS (ELAPSE) button (2) to
show running time/remain time of track.
MP3 OPERATION
• SELECT SONGS
SINGLE STEP SELECTION:
Press TUNE button (16) or TUNE
button (17) to reverse or advance
the previous song in single step.
DIRECT TRACK ACCESS
Pressing number buttons 0~9 (14)
can activate DIRECT TRACK
ACCESS according to your need.
For example, press “1” button, “T1*”
appears and “*” is flashing on the
display and waiting for second
number to be input. Then press “2”
button in several seconds, “T12*”
will appear and “*” is flashing and
waiting for third number to be input.
Then press “3” button in several
seconds, “T123” will appear and
track 123 will be selected to play. If
you don’t press any button when “*”
is flashing, after several seconds,
“T12” appears on the display and
track 12 will be played directly. If you
select a track number that doesn’t
belong to the current disc, “NO FILE”
will appear on the display. For MP3
discs, the track selection range is up
to “254”.
SELECT BY SCAN/MP3 BUTTON:
“Searching track directly” =>
“Searching Directory or File Name”=>
searching from root by VOLUME
/ buttons (11&12) =>searching
from current directory by VOLUME
/ buttons (11&12).
1. SEARCHING TRACK DIRECTLY
Press the MP3 button (13) one
time to enter into “Searching track
directly” mode. Set desired track
by VOLUME / buttons (11&12),
and then press BAND/ENTER
button (18) shortly.
You can also press number
buttons 0~9 (14) can activate
DIRECT TRACK ACCESS to select
your desired track.
Note:
The unit searches the track after few
seconds, even if the BAND/ENTER
button (18) is not pressed.
2. SEARCHING DIRECTORY OR
FILE NAME
Press the MP3 button (13) two
times. It enters into “Searching
Directory or File Name” mode. The
unit searches files and directories
by name which is entered by the
user with the VOLUME / buttons
(11&12).
- Use VOLUME / buttons
(11&12) to select the characters
A to Z, blank, 0 to 9, _, -, +.
- Press SEL/MENU button (10)
to confirm entry of each
characters.
- Press BAND/ENTER button
(18) to start the title search.
In case the selected title is a
directory name, display will show
(‘ ‘), then
- Use VOLUME / buttons
(11&12) to list all songs under
this directory and select the title.
- Press BAND/ENTER button
(18) to confirm and start the
play.
- Repeat the above steps if the
newly selected title is again a
directory.
Note: In this mode, you can also
press the corresponding buttons
listed on the Table 1 below to input
the your desired character to
select the files or directories.
Key Assigned in Searching mode (Table
1)
14
OPERATION