Filter
Top Products
CD OPERATION
• SWITCHING TO CD MODE
If there is no CD inserted in the driver:
Gently insert the CD with the printed
side uppermost into the CD
compartment until you feel some
resistance. The CD will be drawn into
the driver automatically. CD playback
begins.
If a CD is already inserted in the driver:
Keep pressing MODE button (6) shortly
until the CD mode display appears.
• EJECTING A DISC
When pull out the plastic panel and
display the disc slot (5), the disc in the
slot will eject automatically.
If insert a disc into the slot to play with
the plastic panel open, press
button
(4) to eject the disc.
When the plastic panel is open, long
press
button (4), the unit will eject
for some seconds automatically to
detect if there are some small scrip or
other objects in the disc slot and eject
them out.
• PAUSE PLAYING
Press /MUTE button (3) to pause
CD player. Press it again to resume
play.
• SELECTING TRACKS
Press TUNE button (16) or TUNE
button (17) to move to the previous
track or the following track. Track
number shows on display.
Hold press TUNE button (16) or TUNE
button (17) to fast reverse or fast
forward. When release the button, the
disc will start play from the current
position.
• DIRECT TRACK ACCESS
Pressing number buttons 0~9(14) (i.e.
19~28) can activate DIRECT TRACK
ACCESS according to your need. For
example, press button (19), and “T-01”
will be flashing on the display. Then
press button (20), “T-12” will appear
and track 12 will be selected to play.
If you don’t press any button when “T-
01” is flashing. After several seconds,
“T-01” doesn’t flash and track 1 is
selected to play. If you select a track
number that doesn’t belong to the
current disc, “NO TR” will appear on
the display.
• REPEAT THE SAME TRACK
Hold press RPT button (22) for several
seconds to continuously repeat the
same track. Press it for several seconds
again to stop repeat.
• PLAYING ALL TRACKS IN RANDOM
Hold press SHF button (23) for several
seconds to play all tracks on CD in
random order. Hold press again to
cancel the function.
• PREVIEW ALL TRACKS
Hold press SCN button (24) for several
seconds to play first several seconds
of each track on the current disc. Hold
press again to stop intro and listen to
track.
• PROGRAM CD TRACKS
Use Program function to select up to
32 tracks to play in any order. Program
works by allowing you to select a track
number for each spot in the playing
sequence. A CD must be inserted and
in CD playing mode to use Program.
- How to program CD tracks
1. Press MEM button (20) for several
seconds to enter Program mode,
then “PGM” stars flashing and “P-
01” icon appear on the display.
2. Press
button (16) or button (17)
to choose track number. For
example, select track 6, then press
MEM button (20) shortly to
memorize it and “P-02” will appear
on the display. So track 6 will be
played first. Thus, you can also
press / buttons (17) and (16) to
choose track number 10 and press
MEM button shortly, then “P-03”
will appear. So track 10 will be
secondly played. Repeat these
operations, and you can program
CD tracks to your need. If you
completed program setting, press
PGM button (21) for several
seconds to play CD in
programmed order.
Note: Using Program function can only
select up to 32 tracks to play in any
order. When you have selected 32
tracks to be programmed. “FULL” will
appear on the display.
-
When the CD is played in programmed
order by pressing PGM button (21)
for several seconds, pressing it again
13
OPERATION