Filter
Top Products
• SWITCHING ON/OFF THE UNIT
Switch on the unit by pressing any
button (except
EJECT (4)). When
system is on, press POWER button (9)
to turn off the unit. When system power
turns on, the system is returned to
previous mode.
• DISPLAY THE DISC SLOT
Press the hook (7) of the plastic disc
cover then poke it at a slight downward
force to let the cover open, then you
can see the disc slot (5).
When you want to close the disc cover,
push the hook into proper location at
a horizontal force.
• SOUND ADJUSTMENT
Press SEL/MENU button (10) shortly
to change audio mode through volume,
bass, treble, balance, and fader mdoes,
Press VOLUME
button (11) or
VOLUME
button (12) to adjust the
selected mode. When the currently
displayed function has not been
adjusted for several seconds, the mode
shall return to volume position and
display will return to normal radio, CD
display.
Volume
Press SEL/MENU button (10) one time.
Adjust volume level by VOLUME
button
(11) or VOLUME
button (12).
Notes:
The unit is initially set to volume mode.
Bass
Press SEL/MENU button (10) two times.
Adjust bass level by VOLUME
button
(11) or VOLUME
button (12).
Treble
Press SEL/MENU button (10) three times.
Adjust treble level by VOLUME
button
(11) or VOLUME
button (12).
Balance
Press SEL/MENU button (10) four times.
Adjust sound balance between left and
right speakers by VOLUME
button (11)
or VOLUME
button (12).
Fader
Press SEL/MENU button (10) five times.
Adjust sound balance between front and
rear speakers by VOLUME
button (11)
or VOLUME
button (12).
MENU SELECTION FUNCTION
Hold press SEL/MENU (10) for several
seconds to enter menu select function,
then step short press SEL/MENU (10) to
select different set mode and separately
to press VOLUME
button (11) or
VOLUME
button (12) to select your
requisite as following order.
For detailed operations, please see below:
BEEP ON/OFF
Hold press
SEL/MENU button (10) for
several seconds, when BEEP ON/OFF
appears, press
VOLUME button (11) or
VOLUME
button (12). to select BEEP
on or BEEP OFF. When beep on, the beep
in generated when every button is pressed.
When beep off, the beep is disabled when
press any button.
Program power on volume level
Hold press
SEL/MENU button (10) for
several seconds, when BEEP ON/OFF
appears, press
SEL/MENU button (10)
shortly one time to select “program power
on volume level” mode. And then you can
press
VOLUME button (11) or VOLUME
button (12) to select the level when the
unit turns on.
USA/EUR
Hold press
SEL/MENU button (10) for
several seconds, when BEEP ON/BEEP
OFF appears, press
SEL/MENU button
(10)
shortly two times to select “USA/EUR”
mode. And then you can press
VOLUME
10
OPERATION
Volume Bass Treble Balance Fader
BEEP ON/OFF PROGRAM POWER ON VOLUME LEVEL
CLOCK ON/OFF WHILE POWER OFF USA/EUR
FREQ/CLOCK/NO PRI PRIORITY 12 HOURS/24 HOURS
Hook