PYLE Audio PTCDS2UI Turntable User Manual


 
PHONO FUNCTION OPERATION:
Select to the PHONO function. Make sure that you have removed the stylus cover from the
stylus .
1. Place your PHONO DISC on the center spindle.
2. Adjust the OFF/ VOLUME control to the desired level.
NOTE: Do not turn or stop the turntable manually. Moving or jarring the turntable without
securing the Tone Arm clamp could result in damage to the Tone Arm.
3. Set the turntable speed selector to the appropriate speed, 33, 45, or 78 RPM. If you are
playing 45 RPM singles, place the 45 RPM adapter on the center spindle.
4. To turn the system off, rotate the OFF/VOLUME control knob counter clockwise until a
click is heard.
5. When turntable finishes playing, tone arm will return to original position automatically.
6. Move up or move down the speed adjustor to adjust PHONO playing speed. When the
Speed display indicates not exact 33 & 45 & 78.
AUX IN (IPOD)FUNCTION OPERATION
Select to the PHONO function. Insert two ends cord into"AUX IN"socket of PTCDS2UI and
corresponding socket of the MP3 player respectively. Operate the MP3 as usual and through
the speaker of PTCDS2UI can hear the songs from the MP3
BEFORE PLAYING A RECORD, PLEASE USE A SCREWDRIVER
OR COIN TO TURN THE TRANSIT SCREW COMPLETELY DOWN
IN CLOCKWISE DIRECTION TO UNLOCK THE TURNTABLE.
TO LOCK TH E TURNTABLE AGAIN FOR TRANSPORTATION,
PLEASE TURN THE SCREW IN COUNTER - CLOCKWISE
DIRECTION.
IMPORTANT!!
TO PROTECT THE TURNTABLE FROM DAMAGE DURING TRANSPORTATION,
A SILVER TRANSIT SCREW IS LOCATED IN THE UPPER RIGHT CORNER OF THE
TURNTABLE PLATFORM.
8
PTCDS2UI MP3/MP4
MENU