PYLE Audio PTCDS2UI Turntable User Manual


 
PHONOGRAPH
1) Turntable
2) 45 RPM Adapter
3) Transit Screw
4) Cue Lever
5) Speed Selector (33 / 45 / 78 RPM)
6) Tone arm Lock
7) Tone arm with Stylus
:
REMOTE CONTROL OPERATION:
R1.OPEN / CLOSE
R2.RECORD
R3.REPEAT
R4.PLAY / PAUSE
R5.DN/FB (SKIP REV)
R6.DN/FF (SKIP Forward)
R7.STOP
R8.TRACK -10
R9. TRACK +10
R10.RANDOM
R11.DELETE
R12.PROGRAM
NOTE: ALL of the buttons on the remote control have the same function as these buttons in
the unit. This remote control just used for CD/MP3, USB mode.
OPERATING INSTRUCTIONS
LISTENING TO THE RADIO
To turn the system on, select the AM or FM function, adjusting the TUNING button to receive
stations, when get the clear station, if you tune to strong FM Stereo station the FM ST
indicator lamp will light and reception will be in stereo. If you tune to a weaker FM station, the
reception will automatically switch to mono.
Antenna Information
The AM antenna is inside the cabinet. If AM reception is unsatisfactory try repositioning the
cabinet slightly until the internal antenna is picking up the strongest signal.
The FM wire antenna is located on the back of the cabinet. If necessary, adjust the position
and direction of this antenna until you find the position that provides the best reception.
4