Filter
Top Products
2
INTRODUCTION
RESET FUNCTION
A RESET button is located on the front panel (to the left side of EJECT button) and is
accessible only when the magazine door is opened. The RESET button is recessed
in order to prevent accidental engagement, and can be activated with the tip of ball-
point pen or any similar pointed object. The reset circuitry is provided in order to
protect the unit's microprocessor and tracking system and should be activated only
under the following conditions:
a. Initial installation after all wiring is completed;
b. Abnormal operation is encountered such as not loading a Disc; and
c. Indication on controller display is erratic.
REMOVE THE TRANSPORT SCREWS
Four screw that lock the CD player's mechanism during transport are located on the
bottom of the unit. Remove these screws and keep with your literature package for
future use should the unit need to be transported for service/maintenance.
After removal, be sure to seal these holes using the adhesive stickers provided with
the unit.