PYLE Audio DISC CD CHANGE CD Player User Manual


 
10
OPERATION
Liquid Crystal Display (LCD) - (1)
LCD display will only be active when the changer power is on. This display indicates
all operation key's, including DISC number. Track number, and DISC icon.
Random Play Button - (2)
(Track or DISC Random)
This is used for random selection Disc play, and sequence.
Once this button is pressed. "RDM" is displayed in the Upper left corner of LCD
commander, and disc selection will begin random play.
When this button is pressed for more than 2 seconds, "DISC" and "RDM" are
displayed.
At this time, all Disc's are selected to play randomly.
To release the random selection function, push either the random or disc buttons
again.
Repeat Play Button - (3)
(Track or DISC Repeat)
This is used for repeating Disc/Track play. Upon pressing this button once. "APT" will
be displayed on the LCD, and the playing will be repeated.
When this button is pressed for more than 2 seconds. "DISC" and "RPT" will be
displayed on the LCD. This will repeat the disc playing in its entirely. To stop function,
depress either the repeat button or the disc button.
Play/Pause Button (Play/Pause) - (4)
To pause all play functions of CD Changer. Push the "Pause" button. To return to play
mode, depress the "Pause" button again.
Track Selection (Track up/down) and Track FF/REW - (5), (10)
These button are used to search for a disc or track quickly. Press T-Up or T-Down
button to search to the desired track or disc. Disc and track information will be
displayed on the LCD. Upon pressing these buttons for more than 2 seconds, you
may Fast Forward/Rewind in the direction desired.
Random Sensor Receiving Light - (6)
This is to receive infrared signal from card-type Remote Commander. (Avoid any
foreign substances or contamination.)
Scan Play Button ( Track or DISC Scan ) - (7)
Upon pressing this button. "SCAN" is displayed in the lower left corner LCD display.
The unit will play each.
Track on disc for 10 seconds. When this button is pressed for more than 2 seconds.
"DISC" and "SCAN" will be displayed and unit will play first 10 seconds of each disc.
Disc Selection Button ( DISC Select ) - (8),(11)
Press D-Up button to select upper DISC, and press D-Dn button to select the lower
DISC. All disc functions will be displayed on the commander LCD.
Power Button ( Power On/Off ) - (9)
Press this button to turn On/Off the changer.