Filter
Top Products
BACK TO CONTENTS
FEATURES / SPECIFICATIONS
1
Adaptive MOSFET Switching Power Supply
Fully Complementary Triple Darlington Output Stage
AM IV
Protection Circuitry
QBASS PLUS
™
Bass Boost
QBASS REMOTE
™
Compatible
Advanced Buss Technology
Forced Air Thermal Management
Two-Way 24dB/Octave Linkwitz-Riley 90Hz Crossover
Crossover Line Outputs
Balanced Differential Input Stage
High Voltage Input Capability with Input Attenuation Switch
Gold Plated RCA Input and Output Connectors
PowerLock
Speaker and Power Wire Connectors
Mixed Mono/Stereo Operation
Three Year Warranty when installed by an Authorized
PrecisionPower
Dealer
Completely Designed and Handcrafted in the USA
Specifications
Power Bandwidth 4.5 Hz - 100 kHz
Total Harmonic Distortion 0.02 %
Input Topology Differential
Input Sensitivity 150mv - 12 volts RMS
Input Impedance 10 k Ohms
Load Impedance (stereo) 2 - 8 Ohms
Load Impedance (bridged) 4 - 8 Ohms
Supply Voltage 11 - 15 volts
Damping Factor >500
Slew Rate >50 V/µS
QBASS PLUS
™ Up To +18dB Boost
Frequency Centers 30Hz, 36Hz, 44Hz and 60Hz
Idle Current: PC2400
1.5 Amps
PC2600
2 Amps
PC21400
3 Amps
Crossover Two Way, 24dB/Octave Linkwitz-Riley
Crossover Frequency 90Hz
Continuous Output Power Dimensions
PC2400
100 WRMS x 2 @ 4Ω per channel Length - 15.75"
200 WRMS x 2 @ 2Ω per channel Height - 2.25"
400 WRMS x 1 @ 4Ω bridged Width - 8.9"
PC2600
150 WRMS x 2 @ 4Ω per channel Length - 17.75"
300 WRMS x 2 @ 2Ω per channel Height - 2.25"
600 WRMS x 1 @ 4Ω bridged Width - 8.9"
PC21400
350 WRMS x 2 @ 4Ω per channel Length - 25.25"
700 WRMS x 2 @ 2Ω per channel Height - 2.25"
1400 WRMS x 1 @ 4Ω bridged Width - 8.9"