Polk Audio 6500BT Speaker User Manual


 
Customer Service Hours of Operation: Monday-Friday, 9am-5:30pm est polkcs@polkaudio.com 7
BLUETOOTH
®
WIRELESS TECHNOLOGY
To use your Bluetooth wireless technology device
with the SurroundBar 6500
bt, you must first pair your
device with your SurroundBar.
Pairing creates the ability of your Bluetooth device to connect
with your SurroundBar wirelessly. Pairing is like a handshake
between your Bluetooth device and your SurroundBar 6500
bt
in which they meet and exchange information.
You only have to pair your SurroundBar with your Bluetooth
device one time for this exchange of information to take place.
After that you simply select the “polk soundbar” from your
device list to make the connection to your SurroundBar.
The SurroundBar can hold 8 Bluetooth devices in its memory.
If enough devices pair after yours, your device could
be dropped from the memory list.
Pair and connect your Bluetooth device
with the SurroundBar:
1. Make sure your Bluetooth device and SurroundBar 6500bt
are both powered on.
2. Activate the Bluetooth function on your Bluetooth source
device. See your device’s manual for instructions.
3. Press the Bluetooth source button from the SurroundBar
remote or press the SOURCE button on the SurroundBar
until the Bluetooth source is selected.
The Bluetooth symbol will illuminate, then begin slowly
pulsing as it looks for the paired device.
4. Your SurroundBar will now be displayed on your source
device and available to pair and/or connect. Select the
“polk soundbar” on your device to initiate
the connection process.
5. After a short delay (5 seconds), the two devices should
now be connected. You should hear a short tone and
the Bluetooth source symbol will now be steady blue.
6. Play your music from your device!
Note: If your device asks for a passcode to pair to the
SurroundBar, enter “0000.”
How to disconnect with a Bluetooth device:
1. Press and release the Remote Control Bluetooth button, or
2. Press and release the Bluetooth Source button, or
3. Turn off or disconnect the Bluetooth feature
on your Bluetooth device.
The SurroundBar will emit a short tone and the
Bluetooth source symbol will begin slowly pulsing
when disconnected.
Automatic connection:
Any time you want to connect the last paired device
and play it through the SurroundBar, do the following:
1. Turn your device’s Bluetooth function on.
2. Enter Bluetooth source by pressing the Bluetooth source
button from the remote or press the SOURCE button
on the SurroundBar until the Bluetooth source is selected.
3. After a short delay, the two devices will automatically
connect. You will hear a short tone, and the Bluetooth
source symbol will now be steady blue.
Note: By default, the last connected Bluetooth device
will automatically connect if available.
Pair and/or connect to a device when in Bluetooth
source, but disconnected:
1. Engage the Bluetooth function on your Bluetooth source
device. See your device’s manual for instructions.
a. The SurroundBar will be displayed on your source
device as available to pair and connect. Select
the “polk soundbar” on your device to initiate
the pairing and connection process.
After a short delay, the two devices should now be paired
and connected. You should hear a short tone and the
Bluetooth source symbol will now be steady blue.
How to disconnect:
Note: Anytime The SurroundBar exits SLEEP mode and is in
Bluetooth source, the SurroundBar will automatically connect
to the last paired Bluetooth device if the paired device’s
Bluetooth feature is on.
SOURCELEARN