Filter
Top Products
8
PROCESSOR INPU
PROCESSOR INPUPROCESSOR INPU
PROCESSOR INPUT
TT
T
This input is for use specifically with home theatre processors. In some circumstances you may wish to
use the power amplifier and speakers that the M8 is connected to as the front two channels of a surround
or home theatre environment. The processor input can be used for this purpose, as any signal connected
to the processor inputs can be sent directly to the power amplifier bypassing the M8 entirely.
GROUND LIFT S
GROUND LIFT SGROUND LIFT S
GROUND LIFT SWITCH
WITCHWITCH
WITCH
This switch allows the signal ground to be disconnected from the chassis. In some installations a hum
loop may exist due to duplicate ground paths from different equipment. Use this switch to remove the
connection from 0V to ground thus allowing some flexibility in your particular set-up.
MAINS SWITCH
MAINS SWITCHMAINS SWITCH
MAINS SWITCH
The heavy-duty rocker switch to the right of the panel turns the Mains/Line Power to the amplifier ON or
OFF. The amplifier draws a moderately high current when switched on, so it is not good practice to
rapidly turn the Mains switch on and off repeatedly.
MAINS P
MAINS PMAINS P
MAINS POWER CORD IEC SOCKET
OWER CORD IEC SOCKETOWER CORD IEC SOCKET
OWER CORD IEC SOCKET
This connector is where the mains supply cable from your wall connects to the preamplifier. A fuse
holder is mounted within this connection, and it holds a mains fuse to provide surge and overload
protection for your preamplifier.
E
EE
EARTH POST
ARTH POSTARTH POST
ARTH POST
This is a chassis connected gold-plated earth post for use with most vinyl turntables.