Filter
Top Products
10
SOURCE SELECTIO
SOURCE SELECTIOSOURCE SELECTIO
SOURCE SELECTION
NN
N
The source selection buttons enable changing from one input to another when needed – either CD, Line 1,
Line 2, Line 3, or Line 4.
MENU ACCESS BUTTONS
MENU ACCESS BUTTONSMENU ACCESS BUTTONS
MENU ACCESS BUTTONS
The three buttons labelled Menu and Enter are used to set the M8 menu items. Use the Enter button to
access the menu, then the Up and Down buttons in conjunction with Enter to change settings as desired
(see the settings menu structure section following).
PROCESSOR INPUT SELECTION
PROCESSOR INPUT SELECTIONPROCESSOR INPUT SELECTION
PROCESSOR INPUT SELECTION
Press the Processor button to activate the processor bypass function, allowing a home theatre system to
directly access the front left and right channels of your system. The display will confirm selection of the
processor input by displaying ‘Proc’ for 3 seconds, after which the display reads ‘Processor’. At this time
standby, display and source are the only buttons that still function. To deselect the processor input press
any other source button on the remote control. Note that the processor input only works with the single
ended outputs – the balanced XLR outputs are not live when in processor mode.