Filter
Top Products
Plantronics Savi User Guide 8
Connecting the Power Supply
1 Connect the base power supply into the power jack on
the charger base.
2 Connect the power supply to the outlet. The power
indicator light will be solid green..
Docking and Charging the Headset
1 Gently push the headset into the charging cradle.
The charging indicator light on the headset will ash white to
indicate that the headset battery is charging and will turn solid
white when fully charged.
2 Charge for at least 20 minutes prior to first use. A full
charge takes 3 hours.
Charging Indicator Light
CHARGING TIME
20 min .....................
Minimum charge
before first use
3 hours ...................
Full charge
Power Indicator Light
NOTE The USB charging cable can also be used to charge
the headset.
To successfully charge your headset with the USB cable
the PC must be on and in an active state (not standby). The
charging time will vary according to the number of other
devices drawing power from the PC’s USB port(s).
Connecting the USB Adapter to your PC
1 Insert the USB adapter into USB Port on PC. The indicator
light on the USB adapter will be solid red to indicate the USB
adapter is powered on and will turn solid green when it nds
the headset.
NOTE The headset may have to be charged before the
USB adapter can find it.
2 The USB adapter can be folded as shown.
IMPORTANT NOTE For best performance it is recommended
that Windows is updated with Service Pack levels listed below:
Microsoft Windows
®
XP Service Pack 3 (SP3) or later
Microsoft Windows Vista
®
Service Pack 1 (SP1) or later
Loading software
1 Load Plantronics software by visiting
plantronics.com/software and click on the download
button.
4 System Setup