Filter
Top Products
13
Powering headset on/off
The headset will be ready to use once it has been charged as described in Charging your
headset.
To power the headset on, press and hold the power on/off button for two seconds. The headset
indicator light will remain solid blue for two seconds to confirm that the headset is powered on.
Power on/off button
Indicator light
NOTE The USB adapter indicator light will remain solid blue when the headset is powered on and
paired to the headset. The blue LED on the Bluetooth USB adapter will turn off if the Bluetooth USB
adapter cannot pair or connect to the headset.
To conserve power, you may optionally power the headset off by pressing the power on/off
button for two seconds. The headset indicator light will remain solid red for two seconds to
confirm that the headset is powered off.
NOTE While powered off you will not be able to use the headset.
Placing, answering, and ending calls with Microsoft Lync/Office Communicator
To place a call Dial number using Microsoft Lync/Office Communicator.*
To answer a call on the
headset
Short press call button on headset.
To answer a call when
already on an active call on
your mobile phone
Short press the call button once to end the mobile phone call then press
again to answer your Microsoft Lync/Office Communicator call.
To end a call on the headset Short press call button on headset.
*Consult Microsoft Lync/Office Communicator Help for more information on how to place a call.
Use your headset with Microsoft Office Communicator