Filter
Top Products
6 7
en
Hooking Up the Base
Charging the Dial Pad
1 Insert the dial pad into the charging cradle on the base.
Charge for 15 – 20 hours. The CHARGE indicator light will go on.
2 Once the dial pad is fully charged,
plug one end of the telephone cord into the base and plug the other
end into an active telephone outlet.
NOTE To maximize battery performance, the battery should be charged and discharged
once every six months.
Wearing the Headset
1 Connect the AC adapter power cord to the base and an active
AC outlet.
2 Route the power cord as shown in the illustration.
3 Raise the Base Antenna to a vertical position.
1 Place the headset on your head so the speaker covers your ear.
Adjust the tip of the microphone boom toward the corner of your mouth.
2 You can wear the headset on either ear.
3 The headset has two wearing options:
over-the-head or over-the-ear. The headset ships configured in the
over-the-ear wearing style.
See illustration below for directions to convert headset to over-the-head
wearing style.
1
2
3
Back View