Pioneer VSX-AX3-S Stereo Receiver User Manual


 
Displays and Controls
28
En
Front Panel
All the controls on the front panel are explained and/or referenced here. To open the front panel push gently
on the lower third of the panel.
1 MULTI JOG dial
You can use this dial for many purposes. When
you press the SET UP button (13), you can use it
to perform SYSTEM SETUP operations; select a
function or a listening mode or do TUNER EDIT
functions (in TUNER mode).
2 STANDBY/ON button
Press to switch the receiver ON or into STANDBY
mode.
3 OFF ON button
Press to switch the receiver between OFF and
STANDBY mode or ON.
4 Listening mode buttons (page 45)
There are two types of SURROUND modes:
MOVIE: Press to put the receiver into MOVIE
mode (see page 46).
MUSIC: Press to put the receiver into MUSIC
mode (see page 47).
STEREO/DIRECT (see page 45): Switches the
receiver into STEREO mode if it was in a different
sound mode or toggles between DIRECT and
STEREO mode.
5 ENTER button
Use this button to enter information concerning
the SYSTEM SETUP, listening mode or the tuner.
6 STANDBY indicator
Lights when the receiver is in STANDBY mode.
7 Remote sensor
Receives the signals from the remote control.
8 Display (see page 33)
9 MCACC indicator (see pages 13 and 49)
Lights when the ACOUSTIC CAL EQ is on. (After
the Auto Surround Sound Setup has been
completed the ACOUSTIC CAL EQ is set on and
this display will light.)
multi-voltage
model
European model
Displays & Controls
Displays and Controls
00_VSX-AX3.book Page 28 Monday, May 19, 2003 1:05 PM