Pioneer VSX-D2011-G Stereo Receiver User Manual


 
Fine Tuning Your System
98
En
FINE CHANNEL DELAY
The following steps show you how to adjust the delay level of your speakers more finely than in the NORMAL
setup (see page 43). Adding a slight delay to some speakers is necessary to achieve proper sound depth,
separation as well as an effective surround sound effect. Do this procedure if you want to try and get even finer
surround sound.
The main difference with this setup method and the CHANNEL DELAY setup method in NORMAL setup is that
here the test tone sounds from a reference channel and you use that to measure the target speaker (that is, the
speaker whose level you want to adjust).
Follow steps 1-5 on page 95, if necessary, to get to the
starting point mentioned here.
1
FINE CHANNEL DELAY should be
selected, if it isnt use the 5∞
buttons to select and press ENTER.
2
Use the 5∞ buttons to adjust the
distance of the FRONT L channel.
Press ENTER.
Test tones will be output.
This channel will be the target reference which you
use to measure the other channels.
3
Use the 5∞ buttons to select the
channel you want to adjust. Press
ENTER.
Test tones will be output for the channel you want to
adjust and a reference channel.
Listen to the reference channel and use to measure
the target channel.
4
Adjust the distance of each channel
using the 5∞ buttons.
Listen to the reference
channel and use it to measure
the target channel. Stand
facing the two speakers with
your arms outstretched
pointing at each speaker. Try
to make the two tones sound
as if they are arriving simultaneously at a postion
slightly in front of you and between your arm span.
The distance can be set within a range of 0.1 m to 9.0
m in 0.1 m steps.
When you press ENTER you will automatically go to
the next channel.
5
Press ENTER to select a new
channel. Repeat step 4 for every
channel.
If you want to change a setting before proceeding
Use the 5∞ buttons to go back to the channel you
want to adjust and press ENTER. Then follow step 3.
6
When done select EXIT (if it's not
already selected) and press ENTER.
Next, if you want, proceed to ACOUSTIC CAL EQ.
2
1
DIMMER
1
2
LOUDNESS TONE
3
4
DNR
5
SIGNAL SEL
VIDEO SEL HI-BIT
6
DIRECT ACCESS SEARCH MODE
+
+
10
DISC
ENTER
7
EFFECT/CH SEL
8
9
BASS/TREBLE
0
SYSTEM SETUP
TUNER EDIT TRACK
MENU
GUIDE
TOP MENU
MPX
AUDIO
EXIT
RETURN
ENTER
TUNING
STATION
CHANNEL
1
4
TEXT ON RF ATT DISP MODE
TUNING
+
+
CHANNEL
+
¡
STATION
¢
8
3
7
SUB TITLE
BAND
TEXT OFF CLASS
1-6
Expert
[Crossover Network ]
[Fine Channel Level ]
[Fine Channel Delay
]
[Acoustic Cal EQ
]
[Bass Peak Level
]
[D-Range Control ]
[Exit
]
3.0m
3.3m
2.4m
2.1m
1.8m
1.5m
4.0m
Fine Channel Delay
STD:Front L 3.0m
Front [ ]
Center [ ]
Surround [ ]
Surround [ ]
SurrBack [ ]
SurrBack [ ]
Subwoofer [ ]
[
Exit
]
R
R
R
L
L
1-6
STANDBY/ON
MOVIE MUSIC
MULTI JOG
ENTER
STANDBY
PHONES
SPEAKERS
SIGNAL
SELECT
SB CH
MODE
HI-BIT
HI-SAMPLING
SET UP RETURN
TONE
TONE CONTROL
BASS/TREBLE
BAND
MULTI JOG CONTROL
3.0m
Fine Channel Delay
Front [ ]
L
3
Fine Channel Delay
STD:Front L 3.0m
Front [ ]
Center [ ]
Surround [ ]
Surround [ ]
SurrBack [ ]
SurrBack [ ]
Subwoofer [ ]
[
Exit
]
R
R
R
L
L
3.0m
3.3m
2.4m
2.1m
1.8m
1.5m
4.0m
6