Filter
Top Products
23
En
Set up
1
Press REMOTE SETUP and 1 at the same time
to select the preset mode.
The LED on the remote control starts to blink.
To cancel the preset mode at any time
Press REMOTE SET UP.
2
Press the MULTI CONTROL button for the
component you want to control.
Each button can be set to control one of the following components
DVD/LD : DVD or LD player
TV/SAT : TV or Satellite tuner
VCR/DVR : VCR or DVR (DVD recorder)
CD : CD player
CD-R/TAPE/MD : CD Recorder or Tape deck or MD player
TV CONT : TV or Cable TV tuner
The LED lights steadily.
3
Point the remote control toward the
component to be controlled, enter the 3 digit
preset code.
When you enter the preset code, the remote control emits a power
ON/OFF signal. If the component turns ON or OFF, you have entered
the proper code.
If the component does not turn ON or OFF and there is more than
one preset code, try inputting another code (starting again from step
2).
Some manufacturers use several sets of remote control signals and
the first code may not correspond to your component.
Repeat steps 2 through 3 to recall preset codes for as many
components as necessary.
4
Press REMOTE SETUP to exit the preset mode.
The remote control returns to the previous operation mode.
• When operating a Pioneer DVD/LD player, set the preset
code to “111” in the preset mode.
• TUNER cannot be preset.
Preparations
Recalling preset codes (VSX-609RDS)
The following steps show you how to recall preset codes for each MULTI CONTROL button. Once the preset
code is assigned, pressing the button will automatically set the remote control to operate the respective
component.
• Refer to “Preset Code List” on pages 63 to 65 for the components and manufacturers
available.
• Refer to “Controlling the Rest of Your System” on pages 52 to 55 for detailed explana-
tions on how to operate your other components.
1,4
2
1
3
LED
MULTI CONTROL
DVD/LD TV/SAT VCR/DVR CD
LOUDNESS FUNCTION MUTING
RECEIVER
D.ACCESS
AT T
VOL
MENU
TOP
MENU
VOL
CH
2
DSP MODE
MIDNIGHT
5.1CH
CD-R/
TAPE/MD
CHANNEL
SELECT
CHANNEL
LEVEL
EFFECT
ENTER
FQ
FQ
ST ST
FL
DIMMER
REMOTE
SETUP
MASTER
VOLUME
AUDIO/VIDEO PRE-PROGRAMMED
REMOTE CONTROL UNIT
TV CONTROL
FUNC
10 DISC
SIGNAL
SELECT
TEST
TONE
RECEIVER
TUNER
TV CONT
Î
1234
1 ¡ 4 ¢
7 8 3
5678
90
SOURCE CLASS MPX BAND
CHANNEL
DISPLAY RF ATT
()