Pioneer VSX-9130TXH-K Stereo Receiver User Manual


 
Controls and displays
04
25
En
Chapter 4:
Controls and displays
Front panel
1
INPUT SELECTOR
dial
Use to select an input source.
2
STANDBY/ON
Switches the receiver between on and standby. Power
indicator lights when the receiver is on.
3 Remote sensor
Receives the signals from the remote control (see
Operating range of remote control unit on page 26).
4
PHASE CONTROL
indicator
– Lights when the Phase
Control is switched on (page 12).
ADVANCED MCACC indicator – Lights when one of
the MCACC presets (page 33) is selected.
1
DIGITAL PRECISION PROCESSING indicator
Lights to indicate digital processing (for example, it
disappears when Pure Direct (page 33) is on, or when
listening through the multichannel analog inputs).
DIGITAL VIDEO SCALER indicator – Lights when
Resolution is set to a setting other than PURE (for
example, when the video input signal is upscaled)
(page 73).
HDMI indicator – Blinks when connecting an HDMI-
equipped component; lights when the component is
connected (page 67).
5
MULTI CH IN
Press to select the multichannel analog inputs (page 59).
6
MASTER VOLUME
dial
7 Input source buttons
Press to select an input source.
8
VIDEO
INPUT
See Connecting a component to the front panel inputs on
page 20.
9
iPod DIRECT USB
terminal
Use to connect your Apple iPod as an audio source
(page 52), or connect a USB audio device for playback
(page 54).
MASTER
VOLUME
INPUT
SELECTOR
STANDBY/ON
VSX-9130TXH
AUDIO/VIDEO MULTI-CHANNEL RECEIVER
PHONES
AUTO SURR/
STREAM DIRECT
HOME
THX
STANDARD
SURROUND
ADVANCED
SURROUND
STEREO/
A.L.C.
ST
+
SPEAKERSON/OFFCONTROL
MULTI-ZONE
MCACC
SETUP MIC
iPod DIRECT
USB
DIGITAL INAUDIO RLVIDEO
VIDEO
INPUT
ST
DVD BD TV SAT DVR 1/DVR 2 VIDEO HDMI 1/HDMI 2 CD/CD-R FM/AM iPod USB MULTI CH IN
HDMI
DIGITAL PRECISION
PROCESSING
DIGITAL VIDEO
SCALER
ADVANCED
MCACC
PHASE
CONTROL
XM/SIRIUS
PHONES
AUTO SURR/
STREAM DIRECT
HOME
THX
STANDARD
SURROUND
ADVANCED
SURROUND
STEREO/
A.L.C.
ST
+
ST
SPEAKERSON/OFFCONTROL
MULTI-ZONE
12 3 4 6
7
10
11 12
13
5
98
1514
Note
1 The MCACC indicator does not light when the MCACC preset memory currently being selected has not been corrected with Acoustic Calibration EQ
Professional or when EQ is set to OFF in the Audio parameter menu (see Setting the Audio options on page 73).
VSX-9130TXH_KU.book 25 ページ 2008年4月17日 木曜日 午前11時26分