Filter
Top Products
Connecting up
03
15
En
English
Français
Deutsch
Nederlands
Italiano
Español
Windows Media and the Windows logo are
trademarks or registered trademarks of
Microsoft Corporation in the United States and/
or other countries.
Connecting an HDD/DVD recorder,
VCR and other video sources
This receiver has audio/video inputs and
outputs suitable for connecting analog or
digital video recorders, including VCRs and
HDD/DVD recorders.
1 Connect a set of audio/video outputs on
the recorder to the DVR/VCR AUDIO and
VIDEO inputs on this receiver.
Use a stereo RCA phono cable for the audio
connection and a standard RCA video cable for
the video connection.
1
2 Connect a set of audio/video inputs on
the recorder to the DVR/VCR AUDIO and
VIDEO outputs on this receiver.
Use a stereo RCA phono cable for the audio
connection and a standard RCA video cable for
the video connection.
3 If your video component has a digital
audio output, connect it to a digital input on
this receiver.
The example shows a recorder connected to
the
DIGITAL OPT 1 (CD)
input.
2
The illustration shows the VSX-918V, but
connections for the VSX-818V are the same.
Note
1 If your video component also has a component video output, you can connect this too. See
Using the component video jacks
on page 16 for more on this.
2 In this case, you’ll need to tell the receiver which digital input you connected the component to (see
The Input Assign menu
on page 64).
HDMI
IN
RL
IN
AUX
CD
IN
OUT
DVD
/
BD
TV
/
SAT
FRONT
DVD5.1
CH INPUT
IN
IN
DVR
/
VCR
DVR
/
VCR IN
TV
/
SAT IN
DVD
/
BD IN
AM
LOOP
IN
OUT
DIGITAL IN
OPT
OPT
R
A
FM UNBAL
CONTROL
ANTENNA
DVR
/
VCR OUT
MONITOR
OUT
AUDIO VIDEO
IN
OUT
DIGITAL IN
COAX
(DVD
/
BD)
CD-R
/
TAPE
/
MD
(
ASSIGNABLE
)
(
ASSIGNABLE
)
S
P
E
A
K
E
R
S
SUB
WOOFER
PREOUT
(
DVD
/
BD
)
IN
1
1
1
(
TV
/
SAT
)
IN
OUT
2
(
TV
/
SAT
)
(
CD
)
2
(
ASSIGNABLE
)
R L
VIDEO IN
AUDIO IN
IN
R L
AUDIO OUT
PLAY
OUT
VIDEO OUT
REC
3
21
DIGITAL OUT
OPTICALCOAXIAL
DVR, VCR, LD player, etc.
VSX-918V
VSX_918_818_MY.book 15 ページ ２００７年１２月２７日 木曜日 午後４時２７分