Filter
Top Products
89
EXPERT
Fine Tuning Your System
Other System Settings
These settings are more advanced. Some could add depth or listenability to your sound (like the THX CINEMA
setup) and others are for your convenience (like the FUNCTION RENAME). You can decide if you want to make
these settings or not. They are not crucial to good surround sound. You only need to make these settings once
(unless you change the placement of your current speaker system, add new speakers or components to your
system, etc.). These setup operations use your TV to display the settings and choices so be sure your TV and
receiver are properly hooked up.
Use the arrow buttons (5∞) and the ENTER button on the remote control
to navigate the OSDs on your TV. Conversely, you can use the MULTI JOG dial and ENTER button, and
look at the display, on the Front Panel.
1
Turn on the receiver and your TV,
press RECEIVER on the remote
control.
Make sure your TV is set to the receiver.
2
Press the SYSTEM SETUP button.
The menu possibilities appear on your TV.
3
Follow the order below to make
advance settings. Use the 5∞
buttons to choose a menu. When
you have the setup you want press
ENTER.
In each mode, the current settings are displayed
automatically.
THX CINEMA Setup (page 90)
This setup lets you choose which decoding method
the receiver will use for THX CINEMA.
INPUT ASSIGN (pages 91–92)
If you hook up your digital components in a different
way than the default settings you need to tell the
receiver how you hooked them up so the names on
the remote control and front panel match your home
setup. Do this with the DIGITAL–IN SELECT setup.
Also, if you hooked up video devices with component
video cable you need to tell the receiver which devices
are hook up in this way. Do this with the
COMPONENT–IN SELECT setup.
FUNCTION RENAME (page 93)
This feature allows you to change the names that
appear in the receiver display to reflect what you have
connected.
PHONO/LINE Setup (page 94)
This feature allows you to hook up either a turntable or
a line level component (like a CD player) to the same
terminal. Use this setup to tell the receiver which you
hooked up.
MULTI ROOM (pages 74–79)
You can set up this unit to power systems in different
rooms.
12V Trigger (page 95)
This feature allows you hook up equipment to this
receiver that will go on automatically when you output
a 12 volt power signal from this receiver.
OFF
S0URCE TV
MULTI CONTROL
SYSTEM
RECEIVER
DVD/LD TV/SAT TV CONT
VCR1/
DVR
VCR2 VIDEO CD
MULTI
OPERATION
DIMMER
MD/
TAPE2
CD-R/
TAPE1
TUNER
RECEIVER
1
2
LOUDNESS TONE
3
4
DNR
5
SIGNAL SEL
VIDEO SEL HI-BIT
6
DIRECT ACCESS SEARCH MODE
–
+
+
10
DISC
ENTER
7
EFFECT/CH SEL
8
9
BASS/TREBLE
0
SYSTEM SETUP
TUNER EDIT TRACK
MENU
GUIDE
TOP MENU
MPX
AUDIO
EXIT
RETURN
ENTER
¶
TUNING
–
STATION
–
CHANNEL
–
1
4
DTV ON/OFF DISP MODE
TUNING
+
+
CHANNEL
+
¡
STATION
¢
8
3
7
SUB TITLE
BAND
DTV MENU CLASS
SETUP
1
2
3
3
System Setup
[1. Surround Setup
[2. THX CINEMA Setup
[3. Input Assign
[4. Function Rename
[5. PHONO/LINE Setup
[6. Multi Room
[7. 12V Trigger
[Exit
]
]
]
]
]
]
]
]
STANDBY/ON
MOVIE MUSIC
MULTI JOG
ENTER
STANDBY
PHONES
SPEAKERS
SIGNAL
SELECT
SB CH
MODE
HI-BIT
HI-SAMPLING
SET UP RETURN
TONE
TONE CONTROL
BASS/TREBLE
BAND
MULTI JOG CONTROL
32