Filter
Top Products
Home Menu
7
7
51
The Network Standby menu
This setting allows the AirPlay function for operating the
receiver from a computer connected on the same LAN as the
receiver to be used even when the receiver is in the standby
mode.
1
Select ‘Network Standby’ from the Home Menu.
2
Choose ON or OFF for the Network Standby.
•
ON – The AirPlay function can be used even when the
receiver is in the standby mode.
•
OFF – The AirPlay function cannot be used when the
receiver is in the standby mode (This lets you reduce
power consumption in the standby mode).
-
If the
Network Standby
setting is set to ON, the
power consumption during standby will increase.
3
When you’re finished, press
RETURN
.
You return to the Home Menu.
The ZONE2 Setup
When making multi-zone connections using the ZONE 2 OUT
terminals and performing playback in Zone 2, you can set
whether to adjust the Zone 2 volume on the receiver or to fix it
to a specific volume.
•
Default setting: Variable
1
Select ‘ZONE2 Setup’ from the Home Menu.
2
Select the Vol Level setting you want.
•
Variable – This will output audio at the same volume
as main zone.
•
40 Fixed – Volume will be fixed at 40.
•
MAX Fixed – Volume will be fixed at maximum output.
3
When you’re finished, press
ENTER
.
You return to the Home Menu.
The 12 V Trigger Setting
If the input switches over to the input function set here, a
control signal is output from the receiver’s 12 V trigger
terminal, and operations such as power coupling with other
devices and equipment can be achieved.
1
Select ‘12V Trigger’ from the Home Menu.
2
Select the input function that triggers simultaneous
operation of 12 V trigger output.
3
Choose ON or OFF for the 12V Trigger.
4
When you’re finished, press
RETURN
.
You return to the Home Menu.
8
. Network Standby
Return
Network Standby
OFF
Home Menu
1
. Auto MCACC
2
. Manual SP Setup
3
. Input Assign
4
. Speaker System
5
. Video Parameter
6
. HDMI Setup
7
. Auto Power Down
8
. Network Standby
9
. ZONE2 Setup
10
. 12V Trigger
Home Menu
1
. Auto MCACC
2
. Manual SP Setup
3
. Input Assign
4
. Speaker System
5
. Video Parameter
6
. HDMI Setup
7
. Auto Power Down
8
. Network Standby
9
. ZONE2 Setup
10
. 12V Trigger
9
. ZONE2 Setup
Return
Vol Level
Variable
Home Menu
1
. Auto MCACC
2
. Manual SP Setup
3
. Input Assign
4
. Speaker System
5
. Video Parameter
6
. HDMI Setup
7
. Auto Power Down
8
. Network Standby
9
. ZONE2 Setup
10
. 12V Trigger
10
. 12V Trigger
Return
Input
DVR/BDR
12V Trigger
[
OFF
]