Pioneer VSX-1018AH-S Stereo Receiver User Manual


 
Other Settings
10
68
En
SR+ Setup for Pioneer flat screen TVs
Make the following settings if you have connected a
Pioneer flat screen TV to this receiver using an SR+
cable. Note that the number of function settings available
will depend on the flat screen TV you’ve connected.
See also Using this receiver with a Pioneer flat screen TV
on page 60 and Using the SR+ mode with a Pioneer flat
screen TV on page 61.
1 Select ‘
SR+ Setup
’ from the Other Setup menu.
2 Select the ‘
PDP Volume Control
’ setting you want.
OFF – The receiver does not control the volume of the
flat screen TV.
ON – When the receiver is switched to one of the
inputs that use the flat screen TV (DVD, for example),
the volume on the flat screen TV is muted so only
sound from the receiver is heard.
3 Assign any input source connected to the flat
screen TV to the corresponding input number.
This matches the receiver’s input source with a
numbered video input on the flat screen TV. For example,
assign DVD to input-2 if you have connected the your
DVD video output to video input 2 on the flat screen TV.
•The Monitor Out Connect should be set to the input
that you’ve used to connect this receiver to your flat
screen TV.
4 When you’re finished, press
RETURN
.
You will return to the Other Setup menu.
OSD Adjustment
Use this feature to adjust your TV display if it seems
difficult to see all the instructions on the screen.
1 Select ‘
OSD Adjustment
’ from the Other Setup
menu.
2Use
///
to move the display field around
until you get one that you feel best suits your TV.
3 When you’re finished, press
ENTER
.
You will return to the Other Setup menu.
7.Other Setup
:Return
a . Multi Ch In Setup
b . ZONE Audio Setup
c . SR+ Setup
d . HDMI Control Setup
e . OSD Adjustment
7c.SR+ Setup
PDP Volume Control
OFF
Monitor Out Connect
[ OFF ]
:Finish
7c.SR+ Setup
PDP Volume Control
[ OFF ]
Monitor Out Connect
OFF
:Finish
7.Other Setup
:Return
a . Multi Ch In Setup
b . ZONE Audio Setup
c . SR+ Setup
d . HDMI Control Setup
e . OSD Adjustment
:Finish
[ Finish ]
X= 0 , Y= 0
A
A
A
A
VSX-1018AH_HY.book 68 ページ 2008年4月16日 水曜日 午後7時25分