Filter
Top Products
Other connections
08
45
En
Important
• If you connect to a Pioneer plasma display using an
SR+ cable, you will need to point the remote control
at the plasma display remote sensor to control the
receiver. In this case, you won’t be able to control the
receiver using the remote control if you switch the
plasma display off.
• Before you can use the extra SR+ features, you need
to make a few settings in the receiver. See
The Input
Assign menu
on page 46 and
SR+ Setup for Pioneer
plasma displays
on page 48 for detailed instructions.
• Use a 3-ringed miniplug SR+ cable to connect the
CONTROL IN
jack of this receiver with the
CONTROL
OUT
jack of your plasma display.
To make the most of the SR+ features, you should
connect your source components (DVD player, etc.) in a
slightly different way to that described in this chapter. For
each component, connect the video output directly to the
plasma display, and just connect the audio (analog and/
or digital) to this receiver.
Using the SR+ mode with a Pioneer
plasma display
When connected using an SR+ cable, a number of
features become available to make using this receiver
with your Pioneer plasma display even easier. These
features include:
• On-screen displays when making receiver settings,
such as speaker setup, MCACC setup, and so on.
• On-screen volume display.
• On-screen display of listening mode.
• Automatic video input switching on the plasma
display.
• Automatic volume muting on the plasma display.
See also
SR+ Setup for Pioneer plasma displays
on
page 48 for more on setting up the receiver.
Important
• The additional SR+ features do not work when the
XM Radio function is selected.
1 Make sure that the plasma display and this receiver
are switched on and that they are connected with the
SR+ cable.
See
Using this receiver with a Pioneer plasma display
above for more on connecting these components.
• Make sure you have also selected the display input to
which you’ve connected the receiver in
The Input
Assign menu
on page 46.
2 To switch SR+ mode on/off, press
RECEIVER
, then
the SR+ button.
The front panel display shows
SR+ ON
or
SR+ OFF
.
• The automatic volume muting feature is enabled
separately; see
SR+ Setup for Pioneer plasma displays
on page 48.
MULTI JOG
MASTER
VOLUME
ENTER
AUDIO/VIDEO MULTI -CHANNEL
RECEIVER
VSX
-
1016TXV
STANDBY/ON
PHONES
DVD/LD
PHASE
CONTROL
TV/SAT DVR/VCR1 DVR/VCR2 VIDEO/GAME CD
CD
-
R/TAPE/MD
FM/AM
LISTENING
MODE
PHASE
CONTROL
ACOUSTIC
EQ
SB ch
PROCESSING
SIGNAL
SELECT
XM
MCACC
SETUP MIC
DIGITAL INAUDIORLVIDEO
VIDEO/GAME
INPUT
S
-
VIDEO
SYSTEM
SETUP
TUNING/
STATION
TUNER
EDIT
SPEAKERSRETURN
TONE
MULTI JOG
MULTI CH
IN
VIDEO
SELECT
SOUND
RETRIEVER
DIGITAL PRECISION PROCESSING
DVD player
Pioneer plasma
display
Satellite receiver, etc
VIDEO
INPUT 1
VIDEO
INPUT 2
TV/SAT
AUDIO IN
DVD/LD
AUDIO IN
XM RADIO
DVR 2
ANALOG
AT T
MIDNIGHT/
LOUDNESS
SB ch
DIMMER
SLEEP
SR+
DIALOG E
S.RETRIEVER
PHASE
TV DVR1
TV CTRL
CD
RECEIVER
TUNERCD-R
DVD
VSX-1016TXV_KU.book.fm 45 ページ ２００６年３月２４日 金曜日 午後９時１９分