Filter
Top Products
Storing the Adjustment Data in Memory
Note:
• When the adjustment data have been stored, the previous data are eliminated and replaced by the
new.
To avoid accidentally erasing stored data
• In order to avoid erasing stored data with new data, it is possible to set up a Protect function
(refer to page 43).
• Protect function is simultaneously turned on for M1, M2, M3 and M4 and it is not possible to store
new data in these memories. In this case, to store the new data, select M5 or cancel the protect func-
tion.
To cancel the protect function, the memory to be canceled must be recalled. Therefore, the current
adjustment data is cleared. When the Protect function has been canceled, make the adjustment
again.
4. Press the SHIFT button to cancel memory mode.
The display returns to the previous screen.
3. To store in memory, press the FUNCTION button corresponding to the
desired memory number for two seconds.
2. Switch to the memory mode of
each menu (refer to page 39).
The display switches to Memory
Operation Screen of each menu.
1. Adjust each Audio Menu.
Equalizer Menu (page 22)
Network Menu (page 27)
40
ENGLISH ESPAÑOL DEUTSCH FRAN
ÇAIS
ITALIANO NEDERLANDS