Filter
Top Products
When you selected MID H.P.F.
• Press the FUNCTION button 3 for two seconds and you can set to PASS of MID H.P.F.
(Press the button again returns to MID H.P.F. slope setting.)
10. Switch between left and right channel to adjust the filter.
Repeat steps 3–9 to adjust the filters of left and right.
9. Press FUNCTION button 4 and
adjust the phase of each band.
Press the button to change between
normal (NOR) and reverse (REV).
Set up the one which makes the better
link to the next band.
8. Press FUNCTION button 3 and
adjust the slope of each filter.
Press the button to change the
adjustment values.
The slope can be set up for either the
high pass filter or the low pass filter.
When setting up, have in mind the
adjustments to be made to the next
band.
7. Press the 5/∞ buttons and
adjust the level of each band.
Holding down these buttons continues
their operations.
Switch to each band and adjust the
level in order to create a better overall
balance.
36
ENGLISH ESPAÑOL DEUTSCH FRAN
ÇAIS
ITALIANO NEDERLANDS