Filter
Top Products
15
TAD Reference One Owner’s Manual
Horizontal Bi-Amping
With this configuration, you may use different stereo amplifiers for the low- and high-frequency sections of the
loudspeaker (e.g., tube amplifiers for high frequency and solid state for low frequency). Each channel of one
amplifier drives the low-frequency section of each loudspeaker and each channel of the other amplifier drives the
high-frequency section, as shown in Figure 11.
This method requires that both amplifiers have the same gain; otherwise an imbalance will be heard between the
low- and high-frequency reproduction from the loudspeaker. If in doubt, please consult your TAD dealer.
HF
LF
SPEAKERS
O
UTPUT
INP
UT
S
PEAKER
S
O
UTPUT
INP
UT
OUTPUT
UT
O
UTPU
T
Te
rmin
a
l P
a
n
el
T
Amplifier
(
rear
)
p
()
(Use for hi
g
h frequencies
)
Amplifier
(
rear
)
p
()
(Use for low fre
q
uencies
)
Pre-Am
p
lifie
r
(
rear
)
(
one c
h
anne
l
s
h
own
)
(hlh)
(one
channel
sho
w
n)
(one channel sho n)
(one
channel
sho
w
n)
(one channel sho n)
TAD Reference One
e
"Y" Adaptor
(Not supplied)
Figure 11. Connecting a TAD Reference One
loudspeaker in a horizontal bi-amplified system.
TAD-R1_En.book 15 ページ ２００６年１２月４日 月曜日 午後２時４２分