Filter
Top Products
Other connections06
20
En
•If after pressing XM the display shows
ANTENNA, try disconnecting the antenna
and reconnecting.
1
Listening to XM Radio
After connecting, you will be able to use this
receiver to select channels and navigate
categories using the front panel display.
Selecting channels and browsing by genre
You can browse XM Radio channels in the
order that they appear, or you can narrow your
channel search by genre.
•Use the
/
buttons to select a channel
then press
ENTER
to listen to the XM radio
broadcast.
•To browse by genre, first press
CATEGORY, use / to select a genre
then press ENTER.
2
• To cancel and exit any time, press
RETURN.
Tip
• You can select channels directly by
pressing D.ACCESS then the three-digit
channel number.
•You can press DISPLAY to change XM
Radio information in the front panel
display.
Saving channel presets
This receiver can memorize up to 30 channels,
stored in three banks, or classes, (A, B and C)
of 10 stations each.
1 Select the channel you want to memorize.
See Selecting channels and browsing by genre
above.
2Press
T.EDIT
.
The display shows a blinking memory class.
3 Press CLASS to select one of the three
classes then press
/
to select the channel
preset you want.
You can also use the number buttons to select
a preset.
• The default for all presets is CH001.
4 Press
ENTER
.
After pressing ENTER, the preset class and
number stop blinking and the receiver stor es
the XM channel.
Listening to channel presets
You will need to have some presets stored to do
this.
1 Press CLASS to select the class in which
the channel is stored.
Press repeatedly to cycle through classes A, B
and C.
2 Press
/
to select the channel preset
you want.
• You can also use the number buttons on
the remote control to recall the channel
preset.
About XM
XM, SIRIUS and all related marks and logos are
trademarks of Sirius XM Radio Inc. and its
subsidiaries. All other marks and logos are the
property of their respective owners. All rights
reserved. XM subscription sold separately.
Taxes and a one-time activation fee may apply.
XM tuner and home dock required (each sold
separately) to receive the XM service. All
programming and fees subject to change. It is
prohibited to copy, decompile, disassemble,
reverse engineer, hack, manipulate or
otherwise make available any technology or
software incorporated in receivers compatibl
e
with the XM S
atellite Radio System. Service not
available in Alaska or Hawaii.
Note
1After unplugging the receiver, LOADING shows in the display for about 1 minute when switched back on.
2 Select CH000 (RADIO ID) from the front panel display to check the Radio ID of the Connect-and-Play antenna.
A9MK2_CUXCN.book 20 ページ ２００９年４月７日 火曜日 午前１０時２６分