Filter
Top Products
Additional information
13
78
En
Chapter 13
Additional information
Switching off the demo
• Default setting:
Demo On
This system has an automatic demo feature
that starts when the system is plugged in for
the first time.
1 Switch the system into standby.
2 Press SYSTEM SETUP.
3 Use the
/
(cursor left/right)
buttons to select ‘Demo Mode?’, then
press ENTER.
4 Use the
/
(cursor up/down)
buttons to select ‘Demo Off?’ then press
ENTER to confirm.
• After setting the clock, the demo mode
switches off automatically. However, if
you unplug the system from the wall
outlet, the demo mode will revert to
Demo
On
(and the clock will be reset).
Child Lock
• Default setting:
Lock Off
This system has a child lock feature that
makes the front panel buttons and controls
inoperative.
1 Switch the system into standby.
2 Press SYSTEM SETUP.
3 Use the
/
(cursor left/right)
buttons to select ‘Child Lock?’, then press
ENTER.
4 Use the
/
(cursor up/down)
buttons to select ‘Lock On?’ or ‘Lock Off?’.
5 Press ENTER to confirm.
Changing the clock format
• Default setting:
12-Hour
You can choose to display the clock in either
12 or 24 hour formats.
1 Switch the system into standby.
2 Press SYSTEM SETUP.
3 Use the
/
(cursor left/right)
buttons to select ‘12/24 Hour?’, then press
ENTER.
4 Use the
/
(cursor up/down)
buttons to select either ‘12-Hour?’ or ‘24-
Hour?’.
5 Press ENTER to confirm.
Setting the TV format
• Default setting:
AUTO
The default setting of this system is
AUTO
,
and unless you notice that the picture is
distorted when playing some discs, you
should leave it set to
AUTO
. If you experience
picture distortion with some discs, set the TV
system to match your country or region’s
system. Doing this, however, may restrict the
kinds of disc you can watch. The table below
shows what kinds of disc are compatible with
each setting (
AUTO
,
PAL
and
NTSC
).
HTS.book 78 ページ ２００３年４月２８日 月曜日 午後８時０分