Pioneer S-DV99ST Speaker User Manual


 
Other connections
12
75
En
English Italiano Français
Nederlands
EspañolDeutsch
Recording mode
The Recording mode allows you to make
analog recordings from the
LINE 1 (OUT)
jacks.
When Recording mode is on, most sound-
related functions (including
SURROUND
,
ADVANCED
,
AUTO
,
SYSTEM SETUP
)
become inactive. The display will briefly blink
RecMode On
if you try and use a prohibited
function while Recording mode is on.
When Recording mode is off, the audio from
the analog output may be interrupted,
depending on the operation.
1 Press SOUND.
2 Use the
/
(cursor left/right)
buttons to select ‘Rec Mode?’.
3 Press ENTER.
4 Use the
/
(cursor up/down)
buttons to select ‘R.Mode On’ or ‘R.Mode
Off’.
When Recording Mode is
On
a stereo
downmix of multi-channel DVD-Audio
and SACD discs is output from the
speakers and from the analog audio
jacks. Note that with some DVD-Audio
disc, only the front left/right channels are
output. When set to
Off
, multi-channel
DVD-Audio and SACD discs are played
through all the speakers, but front L/R
audio is output from the analog audio
jack.
When
R.Mode On
is selected while
playing SACD, the unit will loose speaker
SW output and bass will become
inaudible.
Connecting using the S-video
output
If your TV has an S-video input, you can use
this instead of the standard video output for a
better quality picture.
Use an S-video cable (not supplied) to
connect the S-VIDEO OUT to an S-video
input on your TV.
Line up the small triangle above the jack with
the same mark on the plug before plugging in.
The S-video ouptut is switchable between
S1 and S2 formats for compatibility with
all TVs. See
S-Video Out
on page 65 for
more on this.
S-VIDEO
OUT
VIDEO
OUT
E1
N
E1
U
T
TV
IN
VIDEO
AV CONNECTOR
AUDIO
ANTENNA
LINE1
IN
LINE2
IN
FM
UNBAL
75
AM LOO
P
ANTENN
A
TV
XV-DV99/XV-DV990
S-VIDEO
INPUT
HTS.book 75 ページ 2003年4月28日 月曜日 午後8時0分