Filter
Top Products
Getting started04
22
En
•
Manual tuning
: Press
TUNE +/–
repeatedly to change the displayed
frequency.
•
Auto tuning
: Press and hold
TUNE +/–
until the frequency display starts to move,
then release. The tuner will stop on the next
station it finds. Repeat to keep searching.
•
High-speed tuning
: Press and hold
TUNE
+/–
until the frequency display starts to
move rapidly. Keep the button held down
until you reach the frequency you want. If
necessary, fine tune the frequency using
the manual tuning method.
Improving FM stereo sound
If you’re listening to an FM station in stereo but
the reception is weak, you can improve the
sound quality by switching to mono.
• Press
MONO
(
SHIFT
+5) to choose ‘FM
MONO?’ then press
ENTER
.
The
MONO
indicator lights when the tuner is
in mono reception mode.
Select
FM AUTO?
above to switch back to auto-
stereo mode (the
STEREO
indicator lights
when receiving a stereo broadcast).
Listening to other sources
You can connect an external source for
playback through this system’s speakers. See
Connecting auxiliary components
on page 12
for more on this.
1 Make sure that the external source (TV,
MD player, etc.) is switched on.
2 Press
LINE
to select the source connected
to the rear panel LINE input.
3 If necessary, start playback of the source.
Tip
• If an auxiliary source is producing
unpleasant distortion from the speakers,
you can reduce the signal level by
switching on the attenuator. See
Optional
system settings
on page 48 to do this.
EV-500-1000.book 22 ページ ２００５年４月５日 火曜日 午後１２時３１分