Filter
Top Products
Additional information
13
75
En
English
Français
Deutsch
Nederlands
Italiano
Español
Wireless speaker system
Considerable noise in
radio broadcasts
(
continued
).
• Connect an outdoor FM antenna (see
Connecting external antennas
on
page 59).
• Connect an additional internal or external AM antenna (refer to the Setup
Guide and
Connecting external antennas
on page 59).
• Turn off any other equipment that may be causing the noise or move it away
from the main unit.
•
Not applicable to the European model –
The tuning interval is incorrect for
your country or region. Try switching the tuning interval (frequency step) (see
Frequency step setting
on page 66).
Auto tuning does not
pick up some stations.
• The radio signal is weak. Auto tuning will only detect radio stations with a
good signal. For more sensitive tuning, connect an outdoor antenna.
Sound is mono only. • Check that the tuner is not set to FM mono (see
Improving poor FM
reception
on page 26).
Problem
Remedy
Problem Remedy
Audio cannot be
received.
• The radio wave reception is variable depending on locations due to
the effects of obstacles and reflecting objects. Try changing the
location of the wireless speaker system a little.
• The transmitter and wireless speaker are designed and sold as a
pair, and they identify each other in communication. This means that
communication is not available between separately purchased
transmitter and wireless speaker.
Audio is interrupted. • This system uses high frequency radio waves that have properties
similar to light, such as linearity, reflection, refraction, diffraction,
and interference. Therefore, placement of the system can result in
weak radio waves and/or interruption.
• The distance between the transmitter and wireless speaker may be
too large. Use the wireless speaker within the reach of the radio
waves (within 10m) from the transmitter.
• The system is being used in a location with radio wave interference
or electrical noise. If so, the unit may need to be relocated.
Audio is suddenly
interrupted.
• There may be radio communication equipment using the same
frequency band (2.4 GHz) as this system, such as a Bluetooth device,
radio LAN device or microwave oven, operating nearby.
No sound from the
wireless speaker.
• If you selected
W.Stereo
, the volume on the wireless speaker may
be turned down too low.
XV-DV525.book 75 ページ ２００４年２月１８日 水曜日 午後２時２９分