Filter
Top Products
Listening to your system
04
29
En
English
Français
Deutsch
Nederlands
Italiano
Español
Chapter 4
Listening to your system
About the listening modes
As explained in
Home theater sound setup
on
page 20 and
Using the wireless speaker system
on page 27, there are several setup options
available. However, unless you have connected
an extra pair of surround speakers, you should
use the Standard (
Listening in surround sound
on page 30) and Advanced (
Using the
Advanced Surround effects
on page 31)
surround listening modes with your setup.
If you have connected an extra pair of surround
speakers,
the Front Surround modes are
available with a 3-spot setup. See
Using Front
Surround
on page 31 for more on this.
Make sure you have completed
Using the
Room Setup
on page 20. For a more detailed
surround sound setup, see
Using the System
Setup menu
on page 50.
Note
• Certain features explained in this section
may not be possible depending on the
source (for example, 88.2 / 96 kHz sources),
or a conflicting system setting. See
Error
Messages
on page 76 for more on this.
Auto listening mode
The Auto listening mode is the simplest way to
listen to any source as it was mastered: the
output from the speakers mirrors the channels
in the source material.
• Press SURROUND to select the ‘Auto’
listening mode.
If the source is Dolby Digital or DTS, the
2
DIGITAL
or
DTS
indicator on the front panel
lights.
Note
• Any previously active Dolby Pro Logic or
Advanced Surround mode is canceled
when Auto listening mode is selected.
TEST TONE
123
ZOOM
TOP MENU
DIMMER
REPEAT
AUDIO ANGLE
RANDOM
SUBTITLE
PROGRAM
456
789
0
FOLDER–
ROOM SETUP
CLR
ENTER
FOLDER+
MENU
HOME
SETUP
SYSTEM
CLOCK
TIMER/
BASS MODE DIALOGUE
MAIN SUBSUB
SURROUND
WIRELESS
SR+
DISPLAY
DIALOGUE CH LEVEL
ADVANCED VIRTUAL SB
MIDNIGHT
QUIET/
XV-DV525.book 29 ページ ２００４年２月１８日 水曜日 午後２時２９分