Filter
Top Products
Additional information
13
69
En
English
Français
Deutsch
Nederlands
Italiano
Español
Place on an unstable surface, or one that is
not large enough to support all four of the
unit’s feet.
Cleaning the pickup lens
The DVD player’s lens should not become dirty
in normal use, but if for some reason it should
malfunction due to dust or dirt, consult your
nearest Pioneer authorized service center.
Although lens cleaners are commercially
available, we do not recommend using them
since some may damage the lens.
Problems with condensation
Condensation may form inside the player if it is
brought into a warm room from outside, or if
the temperature of the room rises quickly.
Although the condensation won’t damage the
player, it may temporarily impair its
performance. For this reason you should leave
it to adjust to the warmer temperature for
about an hour before switching on and using.
Moving the system unit
If you need to move the main unit, first remove
a disc if there’s one in the player, then press
STANDBY/ON
on the front panel to turn the
system off. Wait for
Good Bye
to disappear
from the display, then unplug the power cord.
Never lift or move the unit during playback—
discs rotate at a high speed and may be
damaged.
Note
• Unplugging the unit before
Good Bye
disappears from the display may cause the
system to return to the factory settings.
Power cord caution
Handle the power cord by the plug. Do not pull
out the plug by tugging the cord and never
touch the power cord when your hands are wet
as this could cause a short circuit or an electric
shock. Do not place this unit, a piece of
furniture, etc., on the power cord, or pinch the
cord. Never make a knot in the cord or tie it
with other cords. The power cords should be
routed such that they are not likely to be
stepped on. A damaged power cord can cause
a fire or give you an electrical shock.
Check the power cord once in a while. When
you find it damaged, ask your nearest Pioneer
authorized service center or your dealer for a
replacement.
Wireless speaker system
maintenance and precautions
Important
• Even when not in use, the fan in the
wireless speaker will continue to operate.
Switching off the wireless speaker when
not in use will increase product life.
Cleaning the exterior
Use a polishing cloth or dry cloth to wipe off
dust and dirt. If the surfaces are very dirty, wipe
with a soft cloth dipped in some neutral
cleanser diluted five or six times with water and
wrung out well, then wipe again with a dry
cloth.
Do not use furniture wax or cleaners. Never
use thinners, benzine or insecticide sprays or
other chemicals on or near this unit since they
will corrode the surface.
XV-DV525.book 69 ページ ２００４年２月１８日 水曜日 午後２時２９分