Pioneer XW-HTD630A Speaker User Manual


 
Additional Information 03
13
En
English
Chapter 3
Additional Information
Taking care of the unit
Cleaning the unit’s exterior
Use a polishing cloth or dry cloth to wipe
off dust and dirt. If the surfaces are very
dirty, wipe with a soft cloth dipped in
some neutral cleanser diluted five or six
times with water and wrung out well,
then wipe again with a dry cloth.
Do not use furniture wax or cleaners.
Never use thinners, benzine or
insecticide sprays or other chemicals on
or near this unit since they will corrode
the surfaces.
If you use a chemical-impregnated
cleaning cloth, read the instructions
carefully before use. These cloths may
leave smear marks on half-mirror finish
surfaces; if this happens, finish with a dry
cloth.
Unplug the unit when cleaning.
Problems with condensation
Condensation may form inside the unit if it is
brought into a warm room from outside, or if
the temperature of the room rises quickly.
Although the condensation won’t damage the
unit, it may temporarily impair its
performance. For this reason you should
leave it to adjust to the warmer temperature
for about an hour before switching on and
using.
Hints on installation
We want you to enjoy using this unit for years
to come, so please bear in mind the following
points when choosing a suitable location for
it:
Do...
Use in a well-ventilated room.
Place on a solid, flat, level surface, such
as a table, shelf or stereo rack.
Be sure to switch the wireless speaker off
when not in use.
Don’t...
Use in a place exposed to high
temperatures or humidity, including near
radiators and other heat-generating
appliances.
Place on a window sill or other place
where the unit will be exposed to direct
sunlight.
Use in an excessively dusty or damp
environment.
Place directly on top of an amplifier, or
other component in your stereo system
that becomes hot in use.
Use near a television or monitor as you
may experience interference—especially
if the television uses an indoor antenna.
Use in a kitchen or other room where the
unit may be exposed to smoke or steam.
Use on a thick rug or carpet, or cover with
cloth—this may prevent proper cooling of
the unit.
Place on an unstable surface, or one that
is not large enough to support all four of
the unit’s feet.
Moving the wireless speaker
If you need to move the wireless speaker, first
press POWER on the front panel to turn the
unit off. Unplug the power cord.
AC adapter and power cord caution
Do not leave the power cord near heating
equipment. The coating of the cord may
melt, which could lead to fire and/or
electrocution.
Make sure to grasp the body of the AC
adapter when removing it from the power
outlet. If you pull the power cord, it may
become damaged which could lead to
fire and/or electrocution.
Do not attempt to plug in or remove the
AC adapter with wet hands. This may
result in electrocution.