Pioneer VSX-26TX Stereo System User Manual


 
6
Loading the batteries
Load the batteries into the remote control as shown below. Please use alkaline batteries.
Before You Start
“AA” IEC LR6 batteries x 2
FM wire antenna AM loop antenna Remote control unit
Checking the Supplied Accessories
Please check that you have received all of the following supplied accessories.
The following marks and symbols are used throughout
the manual:
Provides additional information, precautions,
and advice.
Indicates a blinking button, indicator, or
display.
Indicates a steadily lit button, indicator, or
display.
How to Use This Manual
CAUTION!
Incorrect use of batteries may result in such hazards as leakage and bursting. Observe the following precautions.
Never use new and old batteries together.
Insert the plus and minus sides of the batteries properly according to the marks in the battery case.
Batteries with the same shape may have different voltages. Do not use different batteries together.
Preparing the Remote Control
When you notice a decrease in the operating range of the remote control, replace all batteries with new ones.
123
memo
\\
This manual is for the VSX-27TX/26TX/24TX Audio/Video
Multi-Channel Receiver.
This manual is divided into three main sections which
will tell you how to setup and use the unit :
PREPARATION
First carry out the tasks below in this “Before You Start“
section to prepare the remote control, then connect the
receiver to your other components as described in
“Connecting Your Equipment“ (p.8). Take special care to
connect your digital equipment like DVDs and LDs
properly to be able to take advantage of the receiver's
surround sound systems (p.10-11). To learn about a
specific button, control, or indicator, see “Displays &
Controls“ starting on p.17.
SET UP
Performing the tasks in "Surround Sound Set Up" (from
p.24) is essential to get proper surround sound.
OPERATION
To play some music or soundtrack refer to “Basic
Playback“ on p.35. “Using the Tuner“ (p.44) explains
how to use the radio of this unit. Doing the operations in
“Remote Control of Other Components“ (p.48) is highly
recommended so you can use this unit's remote control
for all your components. “Using Other Functions“ (p.60)
explain the other possibilities of the receiver.
"Techno Tidbits & Problem-solving“ (p.72) provide
detailed technical information and a troubleshooting
guide.