Pioneer VSX-26TX Stereo System User Manual


 
42
Listening in LOUDNESS Mode
dB
STEREO
LOUDNESSSIGNAL
SELECT
ANALOG
SP
A
VOLUME
LOUDNESS
Press LOUDNESS.
Each press switches LOUDNESS mode on or off.
Basic Playback
The LOUDNESS mode allows you to boost the bass in a signal. It is useful for listening to music at low volumes.
You can’t use the LOUDNESS mode with the THX, DIRECT
or EXTERNAL DECODER modes.
memo
Press EXTERNAL DECODER IN.
Each press switches the input between the previous mode and
EXTERNAL DECODER.
memo
When EXTERNAL DECODER is selected only the volume
level and channel levels can be set. All of this unit’s other
features (DSP modes, ADVANCED THEATER modes,
DIRECT mode, TONE controls, etc.), as well as the TUNER
and PHONO modes, cannot be used. Also, all speaker
settings and other setup settings have no effect.
dB
SIGNAL
SELECT
ANALOG
SP
A
VOLUME
External decoder playback
This feature allows you to connect an external decoder to enjoy certain types of specialized sources.
EXTERNAL DECODER IN
VSX-27TX
VSX-27TX
96kHz 24bit Performance
This receiver is capable of playing back advanced DVD discs which are recorded in 96kHz/24 bit format (these are all
stereo discs). The receiver will automatically read the format of the disc and play accordingly (of course the SIGNAL
SELECT will have to set to AUTO (VSX-27TX only) or DIGITAL to read the DVD soundtrack). When the receiver plays a
96 kHz/24 bit disc "96 kHz" appears in the display. If you try to use one of the functions or modes mentioned below
"96kHz" will light on the display, as shown below, indicating the procedure is not possible.
dB
STEREO
SIGNAL
SELECT
SP
A
DIGITAL
VOLUME
memo
When a 96kHz/24 bit disc is played back the volume may
be louder than that of a normal disc.
Some DVD players cannot play 96kHz/24 bit discs. Check
the manual of your DVD player to make sure.
During this playback you cannot use the tone controls,
the DIRECT function, the LOUDNESS function, any of
the sound modes, or any of the effect modes.
With 96kHz/24 bit discs you are able to use 5.1 ch
EXTERNAL DECODER playback and the TAPE 2
MONITOR.