Filter
Top Products
Other Settings
11
63
En
Assigning the component video inputs
• Default settings:
Component 1
–
OFF
Component 2
–
OFF
Component 3
–
OFF
If you used component video cords to connect your video
equipment you must tell the receiver which device it is, or
else you may see the S-video or composite video input
instead of the component video signal. For more on this,
see
About the video converter
on page 15.
1 Select ‘Component Input’ from the Input Assign
menu.
2 Select the number of the component video input
to which you’ve connected your video component.
Select between
DVD/LD
,
TV/SAT
,
DVR
,
VIDEO1
or
OFF
.
• The numbers correspond with the numbers beside
the inputs on the back of the receiver.
3 Select the component that corresponds with the
one you connected to that input.
• Use the
/
(cursor left/right)
buttons and
ENTER
to do this.
• Make sure you have connected the audio from the
component to the corresponding inputs on the rear
of the receiver.
• If you connect any source component to the receiver
using a component video input, you should also have
your TV connected to this receiver's component video
MONITOR
output.
4 When you're finished, press RETURN.
You will return to the Input Assign menu.
The Other Setup menu
The Other Setup menu is where you can make
customized settings to reflect how you are using the
receiver.
1 Switch on the receiver and your TV.
Use the
RECEIVER
button to switch on.
2 Press RECEIVER on the remote control, then press
the SYSTEM SETUP button.
An on-screen display (OSD) appears on your TV. Use the
///
buttons and
ENTER
on the remote control to
navigate through the screens and select menu items.
Press
RETURN
to confirm and exit the current menu.
3 Select ‘Other Setup’ then press ENTER.
5. Input Assign
[ a . Digital Input ]
[ b . Component Input ]
5b. Component Input
Component-1 [ DVD/LD ]
Component-2 [ OFF ]
Component-3 [ OFF ]
+
10
INPUT ATT FL DIMMER SR
DISC
RECEIVER
MULTI CONTROL
SOURCE
INPUT
SELECT
ENTER
TV CONTROL
VOL
DVD/LD TV/SAT DVR/VCR TV CONT
CD
ST ST
INPUT
SELECT
TV CH
DTV ON/OFF
TUNER
DISPLAY
MPX
AUDIO
CH RETURN
SUBTITLE
DTV INFOREC MUTE
TV VOL
CD-R/TAPE
TUNER RECEIVER
ENTER
REC STOP
HDD
DVD
D.ACCESS
TOP MENU
DTV MENU
CLASS
MENU
BAND
RETURN
GUIDE
T.EDIT
SYSTEM
SETUP
TUNE
TUNE
System Setup
[ 1. Surr Back System ]
[ 2. AUTO MCACC ]
[ 3. MANUAL MCACC ]
[ 4. Manual SP Setup ]
[ 5. Input Assign ]
[ 6. Other Setup ]
Enter : Select
Return : Exit
VSX_1015.book.fm 63 ページ ２００４年１１月２９日 月曜日 午後２時３８分