Pioneer VSX-1015TX Stereo System User Manual


 
Connecting up
03
22
En
3-D view of
7.1 channel
speaker setup
THX speaker system setup
If you have a complete THX speaker system, follow the
diagram below to place your speakers. Note that the
surround speakers ( indicates bi-polar radiating
speakers) should output at an angle parallel to the
listener.
If you have two surround back speakers THX
recommends placing them together and the same
distance from your listening position so you can take
advantage of the ASA feature. For more details see
Advanced Speaker Array (ASA)
on page 74.
See also
Surround Back Speaker Position
on page 48 to
make the settings that will give you the best sound
experience when using the Home THX modes (on
page 32).
AC outlet
Power supplied through this outlet is turned on and off by
the receiver's power switch. Total electrical power
consumption of connected equipment should not exceed
100 W (0.8 A).
Caution
Do not connect a TV set
, monitor, heater, or similar
appliance to this unit's AC outlet.
Do not connect appliances with high power
consumption to the AC outlet in order to avoid
overheating and fire risk. This can also cause the
receiver to malfunction.
Since a subwoofer or power amplifier can exceed the
100W maximum when playing sources at a high
volume, this type of equipment should not be
connected to the AC outlet.
Note
This unit should be disconnected by removing the
power plug from the wall socket when not in regular
use (ex. when on vacation).
FL
LS
Surround
Surround back
Surround
SBL SBR
RS
CFR
B
L
RL
(
Single
)
ND
SURROUND BACK /
SWITCHED 100W
(
0.8A
)
MAX
AC 120V 60Hz
SELECTABLE
SELECTABLE
AC OUTLET
VSX_1015.book.fm 22 ページ 2004年11月29日 月曜日 午後2時38分