Filter
Top Products
25
5 Recording Features
TIME
ENTER
CURSOR
NAME
1
¡
4
¢
NAME CLIP
Copying track names to other tracks
If you need to name several tracks with similar names—several
parts of one suite, for example—you can name the first one using
the procedure detailed above, then simply copy that name to the
other tracks and edit them as required. This can save you a lot of
time over naming each track individually. The recorder stores the
last three names you've copied using the name clip function in its
memory (up to 40 characters each). When you copy another track
name, the oldest one is deleted from memory.
1 Go to the track with the name you
want to copy.
Use one of the usual methods—track skip, direct selection,
etc.
2 Press NAME CLIP to copy the cur-
rently displayed into memory.
The display should confirm that the track name has been
copied.
If the message (c) Copyright appears in the display, the
name is copyright protected (as in the case of playback only
discs) and it can’t be copied.
3 Go to the track that you want to
copy the name to.
4 Press NAME to start editing the
current track name.
5 Move the cursor to the position you
want to insert the copied name.
Use the 1 and ¡ buttons to move the cursor around
the character display.
6 Press NAME CLIP again.
The most recently clipped name appears.
7 Use the jog dial to select one of the
previous three names stored, then
press the jog dial (ENTER).
On the remote, use the 4 and ¢ buttons to select a
name, then press ENTER.
The display flashes Name Insert briefly and the selected
name is inserted at the point you chose.
• Edit the name further if necessary.
8 Press NAME to leave the track name
mode.
3
- COMPACT DISC MULTI CHANGER
COMPACT DISC DIGITAL RECORDER
COMPACT DISC RECORDER / MULTI-CD CHANGER
Hi-bit Legato Link Conversion
CD TEXT
◊ÛB¿ˆ≤≥
REC VOL
NAME
PUSH ENTER
¶
4
1
¡
¢