Pioneer HTZ-FS30DVD-AP Home Theater System User Manual


 
Listening to your system 05
23
En
English
FrançaisDeutsch
Nederlands
Italiano Español
MUSIC (Dolby Pro Logic II Music) – Pro
Logic II 5.1 channel surround sound,
especially suited to music sources (use
with any two-channel source)
DOLBY PL (Dolby Pro Logic) – 4.1 channel
surround sound (use with any two-channel
source)
Each mode shown below is a Pioneer original
sound field mode and is called an “Advanced
Surround” mode.
ACTION – Designed for action movies with
dynamic soundtracks
UNPLUGED – Suitable for acoustic music
sources
EXPANDED – Creates an extra wide stereo
field.
TV SURR – Provides surround sound for
both mono and stereo TV sources.
SPORTS – Suitable for sports programs
ADV.GAME – Suitable for video games
X-STEREO (Extended Stereo)– Gives
multichannel sound to a stereo source,
using all of your speakers.
Dolby Pro Logic II Music settings
When listening in Dolby Pro Logic II Music
mode, there are three settings you can adjust:
Center Width, Dimension, and Panorama.
1 With Dolby Pro Logic II Music mode
active, press
SOUND
.
2Use
/
to select C.WIDTH, DIMEN or
PANORAMA then press
ENTER
.
C.WIDTH (Center Width) – Provides a
better blend of the front speakers by
spreading the center channel between the
front right and left speakers, making it
sound wider (higher settings) or narrower
(lower settings).
DIMEN (Dimension) – Adjusts the depth of
the surround sound balance from front to
back, making the sound more distant
(minus settings), or more forward (positive
settings).
PANORAMA – Extends the front stereo
image to include the surround speakers for
a ‘wraparound’ effect.
3Use
/
to adjust each setting.
C.WIDTH is adjusted within a range of 0
and 7.
DIMEN is adjusted within a range of –3
and +3.
•For PANORAMA, select from PNRM OFF
and PNRM ON.
4Press
ENTER
to confirm.
Using Front Stage Surround
Advance
The Front Stage Surround Advance modes are
effective when you are using the 3spot/2spot
speaker layout as described on page 17.
•Press
SURROUND
repeatedly to select a
Front Stage Surround Advance mode.
FOCUS5.1 – Use to provide a rich surround
sound effect directed to the center area
where the left and right speakers’ sound
projection converges.
WIDE5.1 – Use to provide a surround
sound effect to a wider area than
FOCUS5.1 mode.
EXTRAPWR – Outputs stereo sound (in the
case of multi-channel sources,
down-mixed stereo sound) from the
surround speakers for powerful stereo
effect.
Only for HTZ-FS30DVD/HTZ-FS30DVD-AP:
FOCUS – equivalent to FOCUS5.1 above
WIDE – equivalent to WIDE5.1 above
HTZ585DVD_EN.book 23 ページ 2009年3月19日 木曜日 午後6時35分