Pioneer HTZ787DVD Home Theater System User Manual


 
Other connections12
46
En
Connecting Optional
Bluetooth
ADAPTER
1 Switch the system into standby and
connect
Bluetooth
ADAPTER to the
ADAPTER
PORT
located in the rear panel.
For the connection diagram, see 7 on page 42.
2Press
STANDBY/ON
.
3Press
ADAPTER PORT
and to switch to
BT
AUDIO
input mode.
1
Pairing
Bluetooth
ADAPTER and
Bluetooth
wireless technology
device
“Pairing” must be done before you start
playback of Bluetooth wireless technology
content using Bluetooth ADAPTER. Make sure
to perform pairing first time you operate the
system or any time pairing data is cleared.
“Pairing” is the step necessary to register
Bluetooth wireless technology device to enable
Bluetooth communications.
2
For more details,
see also the operating instructions of your
Bluetooth wireless technology device.
1Press
SHIFT+SETUP
to select
BT SETUP
,
then press
ENTER
.
2Use
/
to select
PAIRING
, then press
ENTER
.
3 Select the PIN code to be used from 0000/
1234/8888 using
/
, then press ENTER.
PAIRING blinks.
CAUTION
You can use any of 0000/1234/8888 PIN
codes. Bluetooth wireless technology
device using any other PIN code cannot be
used with this system.
4 Switch on the
Bluetooth
wireless
technology device that you want to make
pairing, place it near the system and set it
into the pairing mode.
5 Check to see that the
Bluetooth
ADAPTER
is detected by the
Bluetooth
wireless
technology device.
When the Bluetooth wireless technology
device detects the Bluetooth ADAPTER, the
adapter’s identification “AS-BT100” appears in
the Bluetooth wireless technology device list.
3
6From the
Bluetooth
wireless technology
device list, select
Bluetooth
ADAPTER and
enter the PIN code selected in the step 3.
4
Listening to Music Contents of
Bluetooth
wireless technology
device with Your System
1 Press
ADAPTER PORT
and to switch to
BT
AUDIO
input mode.
2 Connect the
Bluetooth
wireless
technology device to the
Bluetooth
ADAPTER.
Note
1 When the Bluetooth ADAPTER is not plugged in the ADAPTER PORT, BT AUDIO input mode cannot be entered even if
ADAPTER PORT is pressed.
2 • Pairing is required when you first use Bluetooth wireless technology device and Bluetooth ADAPTER.
• To enable Bluetooth communication, pairing should be done with both of your system and Bluetooth wireless technology
device.
3 When a Bluetooth wireless technology device does not appear in the list of detected devices or has no display, the Bluetooth
wireless technology device list does not appear. In some cases, you may pair the Bluetooth ADAPTER and that Bluetooth wireless
technology device by using the pairing mode.
4 PIN code may in some case be referred to as PASSKEY.
HTZ585DVD_EN.book 46 ページ 2009年3月19日 木曜日 午後6時35分